What about the computer blue screen and the crash?

　Computer Blue screen crash reason:

The crash makes the operator rather annoying things, often make the fruits of labor in vain. The performance of the crash for many of the blue screen, unable to start the system, the screen "freeze" Wu reflected, the mouse, keyboard can not be entered, the software operation abnormal interruption. The cause of the close tube crash is manifold, but same, the reason for it will never be able to leave both hardware and software. The good machine that is running is now frequently put on a blue face, people are uncomfortable. This introduces some common causes and solutions to the blue screen crash.

　　One, the hardware caused by the crash failure

1. Computer Overheating loss: Display, power and CPU in the work of the heat is very large, so maintain good ventilation status is very important, if the monitor overheating will lead to color, image distortion or even shorten the display life. Working time is too long will lead to power supply or monitor heat loss caused by computer crashes, may give the CPU price a high-performance radiator.

2. Improper movement: In the computer mobile process by a large vibration will often make the machine internal devices loose, resulting in poor contact caused by computer crashes. So you should avoid shaking when you move your computer.

3. Dust OFF: Machine components if contaminated with too much dust particles, such as head, resulting in read and write errors, serious will cause computer crashes and even make components damaged, so to keep the air clean, if the computer dust too much to be cleared.

4. Equipment mismatch: such as motherboard and CPU mismatch, the frequency is too high and too low can cause frequent panic. At this point, you can change the appropriate hardware according to the situation.

5. Hardware and software is incompatible: such as the operation of Photoshop, AutoCAD three-dimensional animation, graphic design software, different hardware devices will be the effect of a different, may cause panic. We can choose the corresponding hardware or software according to the actual situation.

6. Memory failure: Mainly the memory strip loose, virtual welding or the quality of the core of memory caused. According to the body condition to exclude the memory strip contact failure, if there is a quality problem of memory to be replaced.

7. Hard disk failure: mainly hard disk aging or due to improper use caused bad, bad sector. This makes it easy to panic when the machine is running. The plot is lighter, can use the Special tool software to eliminate, more serious can only replace the hard drive.

8.CPU overclocking: Overclocking improves the CPU while also making its performance unstable. The reason is that the CPU in memory (RAM) access to data faster than the memory and hard disk exchange data speed, overclocking makes the contradiction more prominent, exacerbated in memory or virtual memory can not find the need for data, so there will be "abnormal error": the solution but simple; is to let the CPU work at the specified normal frequency.

9. Hardware resource conflict: is due to a sound card or display card settings conflict, caused by an abnormal error. In addition, interruptions of other devices, DMA, or port conflicts may cause a few drivers to be abnormal and panic. Solution: To "Safe Mode" to start, in the "Control Panel-system-Equipment management" to make appropriate adjustments, can generally be resolved. You can modify the registry for situations where an unexpected error occurs in the driver. Select Start-Run, type "REGEDIT", enter Registry Editor, and, through the menu: Find, locate and remove all the primary keys and key values associated with the driver prefix string and reboot.

10. Not enough memory capacity: the larger the memory capacity, the better, should not be less than the hard disk capacity of the 0.5-1%. So you should change the memory as large as possible.

11. The use of inferior components: a small number of unscrupulous businessmen in the assembly of customers to the compatible machine, the use of poor quality of the board, memory, and some even sell fake motherboards and remaek of the CPU, memory, such a machine in operation is very unstable, the crash is inevitable. Therefore, users should polish their eyes when buying a machine, preferably with an expert staff, and use some newer tool software (such as HWInfo, Norton, etc.) to test the computer, long time continuous test machine (such as 72 hours), as well as to strive for as long as possible warranty time.

　　Second, by the software cause of the crash

1. Virus infection: The virus can make the computer's work efficiency drop dramatically, cause frequent panic. At this time, we need to use anti-virus software such as KV3000, Jinshan poison PA, rising and so on to carry out a comprehensive search virus, anti-virus, and do regularly upgrade anti-virus software.

2.CMOS Improper setting: This fault phenomenon is very common, such as hard disk parameter setting, mode setting, memory parameter setting improper, cause the computer cannot start. If the ECC-free memory is set to ECC, this can cause a panic due to memory errors.

3. System file Error deletion (or error): Because the Windows 9X boot needs to have Command.com, Lo.sys, Msdos.sys and drvspace.bn four files, if these files were damaged or mistakenly deleted, Even a variety of hardware settings in the CMOS can be of no avail. Workaround: Start the computer using the boot disk of the same version of the operating system, and then type SYS C: both.

4. Initialization files Find damage: Because Windows 9X startup requires reading System.ini, Win.ini, and registry files, Config.sys, Autoexec.bat files are also read if they exist. The panic may occur as long as there are error messages in these files. In particular, the four documents System.ini, Win.ini, User.dat and System.dat are particularly important.

5. Dynamic link library file (DLL) Missing: There is also a class of files in the Windows operating system that are also important, which is the DLL-wide dynamic-link library file, which is a shared class file in nature, and a DLL file that has multiple software that needs to be invoked at run time. If you delete some application software, the software installer will record the files it once installed and prepare to remove them one by one, it is easy to delete the dynamic link library files, but also other software runtime needs to call the situation. This creates a software error. If the missing link library file is a relatively important core link file, then the system crashes or even crashes.

6, hard disk space is too little or too much debris: if the hard disk space is too small, because some applications need a lot of memory to run, this requires virtual memory, and virtual memory is provided by the hard disk, so the hard disk to have enough space to meet the virtual memory requirements. At the same time also to develop a regular hard drive, cleaning up the garbage files in good habits.

7, Boos upgrade failed: Backup BIOS safekeeping. If your system needs to upgrade your BIOS, it's a good idea to make sure that the BIOS version you use is compatible with your PC before you upgrade. If the BIOS upgrade is incorrect or an unexpected power outage occurs during the upgrade, the system may not start. So be sure to figure out the BIOS model before you upgrade the BIOS. If you are using the BIOS upgrade tool to back up the current BIOS, copy the previous BIOS to the disk. Also see if the system supports BIOS recovery and how to recover.

8, software upgrades improper: Most people think, software upgrades are not a problem. In fact, some of the components that are shared during the upgrade are also upgraded, but other programs may not support upgraded components to cause various problems.

9, misuse of beta software: it is best to use less software test version, because the test software usually with some buc or some aspect is not stable, in the use of data loss after the program error, panic or the system can not start.

10, illegal uninstall software: In the uninstall software is, do not delete the shared files, because some of the shared files may be used by the system or other programs, once deleted these files, will make some applications can not start and panic, or the system running panic. Do not delete the software installation directory directly, if deleted directly, the registry and the Windows directory will produce a lot of garbage, over time, the system will run unstable and cause panic.

11, the use of pirated software: must be thoroughly tox test, because a large number of such software with a lot of viruses, once implemented, it will automatically modify your system, infection system or application software, is the system and the hearts of panic.

12, the application of the software itself is flawed or incompatible with the system software: This is common, such as in Windows 98, those running in DOS or Windows 3.X to run well 16-bit application software. Windows 98 is 32-bit, although it is known to be compatible, but in many places it cannot be coordinated with 16-bit applications. Microsoft is not going to spend a lot of time researching things that are ready to give up. Therefore, if it is not necessary, it is best not to use 16-bit application software.

13, the start of the program too much: This makes system resources exhausted, so that the data required by individual programs in memory or virtual memory can not be found, the system will appear abnormal error. Workaround: Do not start too many applications at the same time. In the event of an "abnormal error", it is only normal to reboot the system.

14, illegal operation: if the illegal format or parameters of illegal open or release the relevant procedures. In this respect, keep in mind the correct format and parameters, and do not open and release unfamiliar programs at will.

15, Non-normal shutdown computer: Do not directly use the chassis power button, otherwise it will cause the system file damage or loss, causing automatic startup or operation of the panic. For systems such as WinDOS 98/2000/nt, this is very important, otherwise serious, can cause system crashes or hard disk damage serious consequences.

16, sometimes running a variety of software normal, but suddenly inexplicably to the panic, restart after the operation of these applications is very normal, this phenomenon is called suspended animation phenomenon. Many of the reasons for this are the conflicts of memory resources in Windows 98, which are known to run in memory, and to free up space after the application is closed. But some applications because of the design, even after the shutdown can not completely release the memory, the next software needs to use a memory address, there will be conflicts.

In short, the cause of the crash of Windows is indeed a variety of abnormal shutdown caused by the solution should also be targeted, just as the computer strange faults, their solutions are also different. Said such a variety of computer crashes cause and way, the purpose is to let everyone understand, when the computer crashed, what happened, so do not have to panic, according to different phenomena, take different solutions, the purpose of only one to make our computer better work.

　　Eliminate blue screen secret technology

When your computer appears this situation, normal operation, suddenly jumped out a hint, you performed illegal operation, the program is about to close, if there are problems, please contact the supplier. Press the "Off" button after the system directly back to the desktop state; What is more, simply appear "System ls Busy" blue screen prompts after the strike, as you move your mouse, knocking on the keyboard, still ignore you, you have to "reset" after only willing to work. If you really accidentally encounter this thing, then, dry modified pictures, creative documents, the production of web pages and so on, anyway you just worked hard to get the results of the lost. There is no practical remedy, and there is nothing to do but think of it as bad luck.

The reason is the GPE caused by the system and the general protective error. In addition to Microsoft's "Windows" is not stable and and some of your computer programs may have a certain conflict, the reduction of available resources in your computer is also an important factor. In fact, the principle is very simple, but there are many users do not pay attention to, below to talk about how to reduce and reduce the computer's resources occupied.

We know that the resources in the computer include GDI (graphical interface) resources; User (users) resources; System (systems) resources three kinds. In which GDI resources mainly save menu buttons, Control Panel objects, palettes and other content; The user resource mainly holds the information in the window of the menu, while the system resource mainly holds all the systems and common resources, and the efforts to reduce and reduce the resources occupied by the computer must revolve around these three aspects. If you understand the cause, you can get down.

　　First, the timely closure of the temporary use of the procedure

Some programs need to be used in time, or they can be closed to conserve resources. If you want to know the resource reuse of a program, you can use the resources in Windows to view it. Compare open programs with closed program resource consumption to understand the resource usage of the program. Method: Opens the Program Attachment System Tool resource status on the Start menu, and the resource status icon appears in the system Tray area. Right-click the icon, select the "Details" column, you can see the system's current resource consumption.

　　Second, set up browsing folders in the same window

In Windows 98, the system defaults are already using the same window for folder browsing and generally do not require additional settings. In Windows 95 and Windows 97, the default setting for the system is not to use the same window for folder browsing, and you need to set it yourself. Open My Computer, select the "Options" column in the View menu, click the left mouse button, select the folder tab in the Options interface that appears, and select the "Browse with same window for each folder" item.

　Third, minimize the system startup when the automatic loading program

There are many automatic loading programs, which affect both the system startup speed and the resources. To cancel the automatic loader, the following methods can be taken:

1, look at the boot hard drive (typically C disk) under the root directory of Autoexec.bat files. Find a statement such as "RUN=XXXX program" and delete it.

2, look at the "start" under the "Start" in the program, and then pop up the list menu in the launcher right click the name of the program you want to remove, and then in the pop-up shortcut menu, click "Delete."

3, repair the "registry". Run the Regedit Registry Editor, and then press the following path

Hkey_local_machinesoftwaremicrosoftwindowscurrent-versionrun or RunServices, find the loader that needs to be canceled, and then delete its corresponding key value.

4, type "MSCONFIG" in "Run" under the Start menu, press the OK button, and then press the "Start" tab in the System Configuration Utility interface that appears, cancel the check on the no loader, press the "apply" or "OK" button, and then restart the computer. The automatic loader will have no trace.

　Reduce shortcut icons on the desktop as well as regular, unscheduled cleanup start menus

The shortcut icon and the items in the Start menu consume GDI resources as well as the user resource, minimizing the desktop shortcut icons and keeping a neat, orderly and concise Start menu is another important way to conserve resources. To do not use the desktop shortcut icon to delete, desktop shortcut icon and Start menu in the Program submenu duplicate items, according to the habit of selecting one can be, the other to delete; organize the type program into a folder and add less volume to the Start menu. If you can organize the components of Office into an Office folder, organize a similar organization into a folder such as tool software, network software, graphics software, and so on.