What happens when the rate slows down after WDS wireless bridging?

solution to slow speed after WDS wireless bridging one, adjust the distance between routers

If the primary and secondary routers are too far away or too many walls, it may result in lower signal strength of the secondary router searching to the main router, which affects the transmission rate between the two, which leads to the low rate of the wireless terminal.

It is recommended to adjust the distance between the two routers to ensure that the secondary router can search for a strong main router signal, signal strength in more than two (such as the secondary router for the traditional interface router, signal strength above 20dB).

Solution to slow speed after WDS wireless bridging two, router bridging with the same rate

If you use a router that has the highest rate for bridging, the two are communicating at a lower rate, such as the 150M and 300M wireless router bridging, and the transfer rate is 150Mbps.

Therefore, when you are building a WDS bridging network, it is recommended that you choose a wireless router bridge with the highest rate, such as 300Mbps or 450Mbps. If you don't have the right equipment on hand, troubleshoot the next factor. It should be emphasized that the low speed of the secondary router bridging the main router, only relative to the main router high-speed rate is slow, not the internet "slow" the main factor.

Solution to slow speed after WDS wireless bridging third, reduce the number of wireless terminals

When multiple wireless terminals are connected to a router, all wireless terminals share the maximum wireless rate of the router. The more wireless terminals are connected, the lower the wireless rate of a single terminal can be.

Therefore, when testing the rate, it is recommended to reduce the wireless terminals connected to the secondary routers and to exclude the possibility of other terminal large flow downloads taking up the bandwidth of bridging links.

Solution to slow speed after WDS wireless bridging four, reduce wireless interference

If there are wireless mouse, wireless keyboard, cordless phone and router working in the same frequency band, there will be interference between the router and the speed of the wireless terminal is seriously affected.

It is recommended to keep these devices away from the secondary router and then test the rate.

Solution to the slow speed after WDS wireless bridging five, reduce the wireless bridge series

All wireless devices are shared wireless transmission media because of the transmission principle of wireless itself. Therefore, when the Router wireless bridge, if the number of series, the transmission of each device can occupy less transmission media, the lower the wireless rate.

Depending on how the WDS wireless bridge is set up, the following recommendations are recommended.

Straight type. That is, "a bridge B, B bridge c ...", the proposed series does not exceed three levels;

Star type. Multiple wireless routers are bridged to a single primary router, and the number of secondary routers depends on the amount of wireless tape on the primary router.