What if the wireless mouse doesn't respond?

Bluetooth wireless Mouse

1 Bluetooth wireless mouse and 2.4G wireless mouse from the appearance can be distinguished, Bluetooth wireless mouse appearance will have a Bluetooth tag, as shown in the red box below.

2

3 As a result of this kind of mouse is Bluetooth communication technology, so for the notebook with Bluetooth function as long as the wireless mouse can be found, the two communicate after each other can be used. It can dispense with a USB receiver compared to a 2.4G wireless mouse, which is quicker to use when paired successfully.

4 for Bluetooth wireless mouse, found that the mouse did not respond we can do the operation:

5 Check whether the computer has Bluetooth function

If it's a new laptop, first check to see if the laptop has Bluetooth capabilities. Because, at present, some notebook computers do not have Bluetooth function.

6 Check whether the computer to turn on Bluetooth function

First, check your laptop desktop to see if the taskbar has a Bluetooth open flag or check the light on the underside of the laptop screen for the Bluetooth led to light up.

Here we take ThinkPad for example, you can check whether the wireless communication hardware switch is turned on (of course, some models are no hardware switch). This hardware switch is usually located in the lower left of the notebook computer, as shown in the following figure red box.

Please dial the hardware switch to the open state, start the Bluetooth hardware, and then press and hold the FN+F5 key to open the wireless communication soft switch, as shown in the following figure

Use a red hat or a touch mouse on your laptop to make sure the soft switch is turned on by clicking on the relevant button. The image above indicates that the soft switch is turned on.

7 Check whether the wireless mouse is powered

Turn the mouse over to see if the wireless mouse switch is turned on, as shown in the following figure red box;

At the same time check the battery cartridge is installed correctly, in order to ensure the battery power, you can directly replace the new battery.

8 If the above operation, the mouse is still no response. You can find a Bluetooth-enabled mobile phone, open the mobile phone Bluetooth function, the mobile phone and notebook computer for Bluetooth communication.

9 If the mobile phone and notebook computer through Bluetooth normal communication, indicating that the computer Bluetooth function is normal, you can speculate that your Bluetooth mouse has a problem need to be replaced; if even the mobile phone can not be with the laptop Bluetooth communication is that your notebook Bluetooth features are abnormal, you need to find professionals to deal with.

10 If you have other laptops, you can also put the Bluetooth wireless mouse installed on another computer for trial, if the other is not able to use the normal, then make sure that your mouse has a problem, the other is just a computer problem.

　　2.4G Wireless Mouse

For 2.4G Wireless Mouse does not respond, you need to do the following:

First of all, find a good cable mouse to the USB interface to see whether the normal use of wired mouse.

If not normal use of the computer USB interface problem, hurriedly find someone to repair it.

If used properly, plug the wireless mouse receiver into the USB interface you just tested and make sure the connection is correct.

Check that the wireless mouse switch is turned on and see that the battery is properly installed.

To make sure the battery has power, you can also replace the new battery. The specific method and the third step of the Bluetooth wireless mouse "Check whether the wireless mouse power", here no longer repeat.

6 after the above operation if the wireless mouse or no response, you can speculate that your wireless mouse has a problem. It seems that you have to replace a new wireless mouse. But do not have to be depressed, as the saying goes: "The old do not go to the heart."