What if the WIN8 system cannot set a static IP address?

Sometimes we need to use the assigned static address on the computer, but what should we do if there is no modification or can not save it? The following small series for you to introduce the WIN8 system can not set static IP address how to do.

1. You can first check that your NIC driver is in good condition. If the NIC driver does not work correctly, you may need to reinstall the NIC driver to see if your network is working properly.

2. If your network card drivers all normal, we recommend that you can use the following methods: Win+x key combination, find and open Device Manager;

3. After opening, locate the following options:

4. Find a network adapter (depending on each individual's network adapter, some computers have wireless and wired adapters.) As an example of a wired adapter:

5. Open Network Properties Click Install---Protocol, click Add--from disk installation, browse to C:windowsinfnettcpip.inf to determine, and then select Tcp/ipv4 installation;

6. If the problem persists, press "windows+x" to open the command prompt (Admin) and enter "netsh int ip reset" carriage return. Follow the prompts to restart your computer to resolve the problem.