What is the difference between Bridge, WDS Bridge and WISP Universal Relay?

What is the difference between Bridge, WDS Bridge, and WISP Universal Relay? 1. Bridge and WDS need to set their own routing MAC on the route from the other side. If both routers are their own, this method can be used. If the network is from ceng, it is better to enter the route. If the network does not enter the route, WDS will not work. You can only use WISP Universal Relay. 2. the WISP can receive wireless signals encrypted by WEP, WPA, and WPA2, and convert them into network cables and wireless signals for simultaneous output after amplifying the signals. 3. After the WDS model, wireless wired cables will not speed down. Some netizens reported that the DD Universal Relay had wireless speed down. However, from the wisp experience of using TENDA308R and 150M, there was no speed reduction. Theoretically, WISP is a combination of client network card and AP, and there is no lower speed. It may be caused by unstable DD. When www.2cto.com 4 and WDS are bridging, the DHCP service function must be disabled for the second AP, And the IP address is allocated to the first AP, which is inconvenient. However, WISP does not need to disable DHCP. 5. There is little difference between WDS and Bridge. BRIDGE can be one-to-many, and WDS can be multiple-to-one. 6. There are many routes that support the WDS mode. Basically, all new routers now support this mode. You do not need to update the firmware. If you want to use the DD Universal Relay, you have to buy a router that supports the DD firmware to brush it. It seems that some routes are not satisfied after the DD firmware is refreshed, and some routes are directly changed to bricks if they are not well refreshed, it is still easy to use the original WISP with low price and good content. Of course, playing relay is not necessarily for the ceng network, but also has many features. In order to ensure stability during bridging and relay, we recommend that you select 11 GB instead of 11bgn hybrid mode.