Indication of the indicator meaning:
Power (green): "Solid" indicates that the fiber transceiver is in power state;
LFP indicator: "Solid" indicates that the LFP function is turned on, "normally extinguished" means that the LFP function is closed;
Fx_link/act (green): "Solid" indicates that the fibre port connection is valid, "flashing" indicates that the transceiver is receiving or transmitting data from the fiber optic connector;
Tp_link/act (green): "Solid" indicates that the RJ45 port connection is valid, "flashing" indicates that the transceiver is receiving or sending data from the RJ45 connector;
TP_SPD (green): "Solid" indicates that the RJ45 port is connected to the 100M device;
Tp_fdx/col (green): "Solid" indicates that the RJ45 port is operating in full duplex mode, and "flashing" indicates a conflict in the RJ45 port data signal. "Not lit" indicates that the twisted-pair port is operating in half-duplex state.
Switch meaning Description:
Tp_auto: Open RJ45 port 10/100m Adaptive;
Tp_dis: Turn off RJ45 port 10/100m Adaptive;
tp_100m: Fixed RJ45 port 100M rate;
tp_10m: Fixed RJ45 port 10M rate;
The TP_FDX:RJ45 port works in full duplex mode;
The TP_HDX:RJ45 port operates in half-duplex mode;
LFP_ON: Open link alarm function;
Lfp_off: Turn off link alarm function;
Note: Each time the configuration switch is changed, the device must be restarted to take effect.
What is the meaning of the panel LEDs and switches on the tr-962d/932d of the optical transceiver?