What should I do if the Samsung printer driver is installed and cannot be printed?

The Samsung printer driver has been installed and cannot be printed. We can analyze the problem in three ways to troubleshoot the problem, such as interface connection problems, two printer status and some assembly or parameter configuration problems of the printer itself, let's take a look.

 

1. Check whether the USB data cable is connected

 

If the printer is not correctly identified after the USB and the printer are connected to the computer, the printer icon is not displayed after the driver is installed.

 

Operation method:

 

1. Shut down the printer power, re-plug the USB data cable, and then turn on the printer, observe whether there is a prompt in the lower right corner of the Computer & ldquo; the new hardware has been installed and can be used & rdquo ;.

 

As shown in the following figure:

 

 

2. If the new hardware has been recognized, but there is still no printer icon and it cannot be printed, it is possible that the printer driver is not properly installed. We recommend that you reinstall the printer driver and try again.

 

2. Check whether the printer server is in normal status

 

 

The printer is not started. After the driver is installed, the printer and fax in the control panel will not display the printer icon.

 

The procedure is as follows:

 

1. Right-click my computer & rarr; manage & rarr; services and applications & rarr; and services ].

 

2. Find print spooler & rarr; right-click Properties and check whether the startup type is started and whether the service status is started.

 

 

 

 

 

 

3. Check the display status of the printer screen

 

Models without screen display:

 

Check whether the panel light is on, the red light flashes, the toner is insufficient; the red light is on normally, the toner is exhausted or the door is opened; the orange light is on, the paper is short of paper, the specific status is recommended you install monitoring software to view it.

 

Model with screen display:

 

The screen will show specific error, such as: no paper, paper jam, door opening, insufficient Toner, replacement of toner cartridges, invalid toner cartridges, not installed, Toner exhausted, etc.

 

Description:

1. if you have an earlier model, go to the machine menu to check whether the [USB] mode option is available. If yes, there will be a speed option in the options. We recommend that you change the speed to slow. Save the settings and restart your computer.

 

 

 

2. We recommend that you uninstall the old driver and try to install the new driver again.

 

 

 

3. Check whether the USB cable is extended. The random USB cable is 1.5-2 meters. If the cable is extended, we recommend that you change the data cable of the standard printer.

 

 

 

4. You can enable the print service through the above operations. If the program reports an error when it is enabled, your computer may have a problem. We recommend that you check whether the computer version is updated completely or try another computer.

 

 

 

If none of the above operations can be solved, click here to view the Samsung service center, and the repair master will help you check the machine.