What should I do if the vro of the tplink router fails to be reset?

What if the vro cannot be reset?

Resetting is also called restoring factory settings and initialization, that is, restoring the router to the factory configuration (default configuration ). All routers support resetting.

In general, you can follow the reset instructions to use RESETButton or small hole for hardware reset:

If the reset fails, refer to the following:

1Confirm that the reset method is correct

Please follow the correct reset guide for resetting.Vro reset method: When the vro is powered on, press and hold the RESET key for about 5 seconds. Wait for the system indicator to flash three times and release it. The vro RESET is complete.

Note:: If it is a RESET small hole, press it with a tip such as a paper clip or pen tip.

2, Try to use software reset

Only for users who can log on to the management interface:Log on to the vro management page and click restart and restore to factory in route settings. For earlier vrouters, go to System Tools> restore factory settings ):

If the vro still fails to be RESET after multiple attempts, the RESET key hardware may be damaged. Please follow the after-sales process.