Why is there a small replay of sound after a microphone recording?
1, the microphone is set to a lower volume.
2, installed an incorrect sound card driver.
Here is a detailed list of the corresponding solutions.
Workaround:
First, if it is a Windows XP system.
1 Click Start, program, Settings, Control Panel, double-click to open Sound, voice, and audio devices, and click the Options menu to open properties. As shown in figure:
2, in the Open property interface, click the Audio Recording option, and then click OK. As shown in figure:
3, if the "adjust volume" in the "recording" is not optional gray, you need to "mixer" inside the option to select "... Audio input "(different models of the computer, the display name may not be the same, but the following are Input). As shown in figure:
4, Return to the "Volume Control" interface, find the "microphone", pull the slider to adjust the volume of the microphone to fit. As shown in figure:
Second, if it is a Windows 7 system.
1. Right-click the "Small horn" icon on the taskbar and select "Recording Device". As shown in figure:
2. Double-click the default device "microphone". As shown in figure:
3. Select the "Level" tab, turn the microphone volume down to fit, adjust microphone enhancement to the appropriate low, and click OK. As shown in figure:
Third, if the use of an application of this phenomenon, you can try to replace another similar application software testing, you can completely uninstall the application, restart the computer, and then reinstall the software and then test. If other software uses the microphone volume to be normal, a small voice is recommended to contact the provider of the software.
Tip: The process of reinstalling the application software is also the process of resetting its settings.
Four, with the Driver wizard to replace different versions of the sound card driver
Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 welcome you to join