What to do when the computer is powered on F1

Sometimes the boot will encounter a large string of English, the general meaning is to let you press F1 to continue to boot into the system. In fact, sometimes this situation is not allowed to happen, such as a lot of public inquiry computer because of the use of touch control, generally do not have a keyboard, this situation generally requires a computer master to deal with, the following I teach you how to remove to press F1 to enter the system, the following methods:

Its English should be: Hareware Monitor found an error,enter power MANAGEMENT setup for details,press F1 to Continue,del to enter SETUP.

And the Chinese explanation should be: monitoring function found error, enter the power MANAGEMENT Setup to see the details, press F1 key continue to boot program, press del key into COMs settings.

This problem is generally because some motherboards have hardware monitoring capabilities, can set the motherboard and CPU temperature monitoring, voltage regulator voltage output and monitor the speed of each fan, when the above monitoring function in the boot found abnormal situation, will appear above the English prompts.

The above prompts are mainly because the BIOS settings are inconsistent with the actual hardware data, settings and settings do not generally include the following aspects

1, the motherboard battery does not have electricity also can cause the data to lose thereby to appear this fault.

2, actually do not have a floppy drive or floppy drive is broken, and the BIOS is set up with a floppy drive, which causes to press F1 to continue.

3, the system setup there are some small errors, not to amend, we suggest to close the hint.

The solution to several problems is roughly as follows:

First, if the motherboard battery is not electricity can change block motherboard battery, judge the motherboard battery is still a method is to enter the system to see whether the system time is the same as the actual time, if not consistent with the general motherboard battery is dead, so you must change the battery.

Two, there are several problems with the floppy drive, there are several ways to solve it.

1, reboot the system, into the BIOS setup, if found that the floppy drive is set to 1.44M, but in fact there is no floppy drive, you need to replace the Idesecondary master auto to none.

2, the boot press the DEL into the motherboard BIOS, enter the boot start to set the boot sequence, turn off the floppy boot.

3, also can turn off the detection function. Start the computer, and then press Del to enter the motherboard BIOS setup main interface, select the "Advanced BIOS Features" settings entry, and "boot up floppy seek" set to "Disabled", so that the boot software detection function can be turned off.

Led to the need to enter the system according to the F1 is actually relatively small problem, we just need to put the floppy drive and some system small error prompts all to disable can solve the problem, of course, must ensure that the motherboard battery has power, otherwise modified BIOS does not take effect.

Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 welcome you to join