What's the point of maintaining the monitor?

There are 4 main factors that affect display life:

First, the environmental humidity problem. When indoor humidity 80% may have the consequence: the humidity maintains in between 30%-80% monitor all can work normally, but once the indoor humidity is higher than 80%, the display inside will produce the condensation phenomenon. Its internal power transformers and other coils are also prone to leakage after damp, there may even be a bad connection, and the high pressure of the display is very easy to produce a discharge phenomenon, the machine components easily rust, corrosion, serious when the circuit board will short-circuit, and when the indoor humidity 30%, will make the display mechanical friction part of the electrostatic interference, The possibility of the internal components being damaged by electrostatic is increasing, which affects the normal work of the monitor. Therefore, we should pay attention to keep the environment around the computer humidity. When it rains, remember to turn the computer on for a while, and when the weather is dry, increase the humidity of the air properly to prevent the effect of electrostatic on the computer.

Second, strong light exposure to the display will also make the display life shortened. The display is easy to accelerate the aging of CRT phosphor and reduce the luminous efficiency under the strong light irradiation. So we should try our best to avoid placing the monitor in the place where the glare shines.

Again, because of the high pressure in the monitor as much as l0kv-30kv, so tall, the voltage is very easy to attract dust particles in the air, the threat of dust on the computer is very obvious, a lot of maintenance practice, in the dusty environment work, because the printed circuit board will absorb dust, The deposition of dust will affect the thermal distribution of electronic components, so that the circuit board and other components of the temperature rise, leakage and burnout components. Dust may also absorb moisture and corrode the electronic circuitry inside the display, causing some inexplicable problems. So we should pay attention to keep the computer around the health environment, but the dust is pervasive, then we can buy or do a special dust cover to the monitor, every time after using the computer should be timely with dust cover, to reduce the impact of dust on the display of its life.

Finally, the interference of electromagnetic fields around the computer will also reduce the computer's service life. Electromagnetic interference refers to the circuit or the environment in the emergence of the voltage and current. The main sources of electromagnetic interference are various components, wires, connectors, cooling fans, fluorescent lamps, lightning, refrigerators, electric fans and other large power consumption of household appliances around or other such as unshielded speakers or telephones too close to the monitor or even the pager has a magnetic field, especially the mobile phone on the display of electromagnetic interference is particularly serious. The electromagnetic interference caused by these devices for a long time can cause the display to display confusion. So we should also pay attention to the problem of electromagnetic interference when placing the computer.