Failure diagram:
Reason analysis and solution method:
1, the motherboard battery is out of power
Method: Remove the COMs battery on the motherboard and wait for a few minutes before reloading it so that the motherboard coms discharge can be restored to the default and the default setting in the BIOS is finally used.
2, it is possible that the system BIOS can not detect the speed of the CPU fan
Methods: 1, in the computer boot press del into the BIOS interface, and then into Powerhardware Monitor, and then here will see the CPU FAN SPEED; Chassis fanspeed; Power FAN speed Three options to change the first item to ignored, the second to N/A, and the third to ignored, then save to exit.
3, may be the fan power cord connected to the wrong
We all know that the general motherboard has more than one fan socket, the CPU fan should be inserted in the Cpu_f this above, if not plugged in here, although the fan is normal, but the motherboard will be prompted to error, method: The CPU fan power plug into the corresponding position, generally can solve the problem.
4, may be the fan is not working properly or the speed is too low caused by
If the fan working too long, it will lead to the inside of the lubricating oil dry, so will cause the fan to slow down, method: In the fan's interior to add a lubricant, increase the speed of the fan will reduce the temperature inside the computer chassis, so that the CPU will not be burned.