If the microphone cannot be started, it may be caused by software or third-party applications or anti-virus software. If you want to solve the problem, you can analyze the problem from these aspects.
The solution and check method are as follows:
1: Check whether the microphone is connected to the host normally and whether it is connected to the corresponding slot (the 3.5 slot of the computer host has two headphones and the microphone slots respectively ). If the connection is not normal, unplug the microphone connection plug and re-insert it into the corresponding microphone slot of the host.
2: Check whether the microphone is disabled by security software such as 360. If the microphone is disabled, completely exit the security software.
3: Check whether the driver is installed on the microphone. If you need to install the driver, download and install the driver from the website provided in the microphone product manual to confirm that the installation is successful.
4: Right-click the speaker icon in the lower right of the desktop and click the recording device option to check whether the microphone is disabled. If disabled, right-click to restore the microphone. Whether other microphones are enabled (for example, headphones and microphone on the camera). If yes, right-click to disable the corresponding device and select enable the corresponding microphone.
In addition, you can troubleshoot computer problems from the following aspects:
1. Right-click my computer -- properties -- hardware -- Device Manager -- sound. Video and game controller -- right-click -- ReaItek High Definition Audio -- update, scan, or uninstall and reinstall. (If there is no sound card driver, please download the corresponding sound card driver)
2. debug microphone: control panel -- high definition audio configuration -- Mixer -- replay -- small wrench -- select all -- OK -- pull on the right> it -- Rear pin kIn -- mute X, and push all the others up; if the microphone is inserted into the front panel, then the microphone volume is X muted, and then the audio I/O-small wrench-disabled front panel jack detection; recording-small wrench-select all-OK-Stereo Sound Mixing-mute X.
3. right-click the small speaker in the lower right corner (the volume of the small speaker is pushed up) -- adjust the audio attribute -- volume -- device volume -- advanced -- (the main volume is pushed up) -- option -- attribute -- microphone volume tick -- OK. Return options -- advanced control -- advanced -- hook microphone enhancement.
4. Webpage sound-free operation method: open webpage -- tools -- options -- advanced -- (checked) play the sound in webpage.
5. In-game mode, the method of high-definition audio configuration on the control panel-audio I/O-headset-select an 8 Ch speaker.
6. Click "Start"> "control panel"> "sound and audio device"> "volume"> "select" to display the small speakers in the lower-right corner. Put the volume icon in the taskbar.
7. How to mix audio and microphone: Right-click the speaker and choose adjust audio Properties> Voice> recording volume> option> Properties> select stereo sound> OK.
8. Front and rear panel Jack debugging: control panel -- high definition audio configuration -- audio I/O -- Simulation -- rear panel -- click the Jack icon -- which device you want to insert