1. Use the command to see if the network card can be used for launch hotspots. Look at the graph, click Run and enter "CMD", and then in the black box enter the Netsh WLAN show drivers to see the red frame in the picture, if it is "yes", congratulations, you can. If it is "no", it will not be.
2. Enable and set the virtual WiFi network card:
Run command: netsh wlan set hostednetwork mode=allow ssid=diligent Key=password
This command has three parameters, as follows:
mode: If the virtual WiFi NIC is enabled, then disallow is disabled.
SSID: Wireless network name, preferably in English (take diligent as an example)
key: Wireless network password, more than eight characters (take password as an example).
the above three parameters can be used alone, such as using only mode=disallow to directly disable the virtual WiFi network card.
after successful, the network connection will be more than one NIC for "Microsoft Virtual WiFi Miniport Adapter" Wireless connection 2,
for convenience, rename it to "virtual WiFi".
if not, just update the wireless card driver is OK.
3. Set up Internet Connection Sharing:
in the Network Connections window, right-click a network connection that is connected to the Internet, such as local Area connection, select Properties →
"Share", tick "allow other ... Connect (N) "and select" Virtual WiFi "
Note: If you click Share and you are prompted with an error, you will need to turn on the Windows Firewall service. "Computer" Right →
"Manage" → "Services and Applications" → "services", find "Windows Firewall" service in the list and start, i.e. ok!
when you are sure, the "shared" word appears next to the icon that provides the shared network card, which means "broadband connection" has been shared to "virtual WiFi
4. Turn on the wireless network:
continue to run at the command prompt: netsh wlan start hostednetwork
(change start to stop to turn off the wireless network, and then turn it on to enable the wireless network after you start the command again)
at this point, the virtual WiFi Red Fork fork disappears, WiFi base station has been set up, the host setup is complete. Notebook, mobile phone with WiFi module
wait for the sub-machine to search for wireless network diligent, enter the password password, you can share the internet!
Turn from--Baidu experience
Win10 laptop How to launch wireless signal