Blue screen error code 0x000000d1 has the following three meanings:
(1) 0x000000d1river_irql_not_less_or_equal;
(2) The signal transmitted by 0X000000D1 is incorrect;
(3) The 0X000004D1 remote system does not support the transmission Communication protocol;
First, the reason analysis
1, memory quality is not high or bad contact or aging.
2, the hardware driver does not match or damage.
3, the system was damaged by virus some hardware configuration files were changed.
4, there are several software conflicts.
If this problem occurs in use and no software or drivers are installed, check the memory. It is usually caused by faulty drivers, defective memory, corrupted virtual memory files, some software such as multimedia software, anti-virus software, backup software, DVD player software and so on can also cause this error.
Second, the hardware failure caused by blue screen solution
1, set the BIOS to the default value.
2, check all connections, to the host dust.
3, check the heat dissipation.
4, test the memory is a problem, clean the slot, and then insert tight.
5, reset the virtual memory, set the virtual memory in a larger space than the C-disk partition.
6, if the Internet encountered this blue screen, and you are doing a lot of data download and upload (such as: Online games, bt download), then it should be the problem of network card driver, replace the network card driver or change the network card.
7, check the latest installation or upgrade of the driver, if the blue screen appears "" "Acpi.sys" and similar filename, you can be very sure when the driver problem, the driver uninstall, reinstall the appropriate driver.
8, replace the video card, sound card driver
9, uninstall, replace the computer software suspected of the problem, especially the killing software. Replace the game software version.
10, it is also possible that the hardware or its drivers are incompatible with the power management of Windows.
(1) Turn off the APM feature if you have APM (Advanced Power Management) settings in Control Panel/Power Options. Also disables the Hibernate feature in Hibernate.
(2) Set the Power Management option "ACPI Suspend Type" in the BIOS to S1 (some machines appear as STR) or turn off the ACPI option directly.
Three, the system failure causes the blue screen The solution method
1, the computer is not loaded with malicious software, or the internet generated a malicious program, the proposed 360 guards, Golden Hill Guardian software, cleaning up garbage, killing malicious software, it may be resolved. Not really, reload, restore the system, can solve the problems caused by software.
2, if not into the system, you can boot to the system after the selection of the F8 select the last correct configuration and security mode, you may be able to enter the system.
3, click the Start menu to run input cmd return, at the command prompt input.
For%1 in (%windir%system32*.dll) do regsvr32.exe/s%1 and then enter. Then let him run out, should be possible to solve.
4, the recent computer poisoning, installation of unstable software, and so on, the proposed total anti-virus, unloading the software that caused the problem, reinstall the other version, it may be resolved. No more, reload the system OK.
5, the computer chassis inside the memory into the dust, take apart the chassis, remove the memory, clean the memory of gold fingers, reload back, it may be.
6, the computer used for a long time memory bad, buy parallel memory, multiple memory incompatible with, and so on, we suggest that the replacement of memory may be resolved.
7, the computer used for a long time, hard disk, repartition installation system can repair the logic bad, or not, it is time to change the hard disk, change a hard drive can be resolved.
