Win7 Automatic update failed to enter the system in two ways

Win7 is now the mainstream operating system, in the use of the process, many people will encounter the power-on or shutdown prompts "Configure Windows Update failed to restore changes do not shutdown" prompts.

In fact, this is Win7 in the case of networking, Automatic Updates caused by the boot or shutdown will prompt, General normal update can be completed, but may be the user has no patience to the system update completed, and forced shutdown caused. If this is the case, we can try the following methods for processing.

The first of these methods

1, reboot the boot, press F8 key, select Safe mode into the system.

2, after the safe mode, point to the computer, right key properties. In the lower-left corner, open Windows Update.

3, then click on the change settings.

4, select "Never Check for updates" and remove the "Allow all computer users to install Updates" selected state. OK, and reboot to see if it's going to go smoothly.

The second method

1, if the above steps fail, you can reboot the system, press F8, select Repair Computer.

2, start the System Restore, select a correct restore point. Wait until the restore is successful, and after the reboot, enter the system to shut down Windows Update.