Win7 computer to display CPU Fan error prompt solution

Win7 computer to display CPU Fan error prompt solution

Method One:

If a CPU fan wiring error occurs, the CPU Fan error prompt is turned on, and the chassis is opened to check that the CPU fan is connected to the motherboard's corresponding interface.

Method Two:

After the boot press the DEL key into the BIOS, into the power of the hardware Monitor, the CPU FAN speed to change the ignored,chassis fanspeed to n/a,power FAN items changed to speed, Then see if there are any more error prompts.

Method Three:

or because of some BIOS setup errors, you can resolve by restoring the default state, or directly remove the motherboard battery, wait a moment and then reload it back, and the power down through the motherboard can also achieve the goal.

Method Four:

CPU fan speed is too low also may be the quality of the fan, the use of long, too much dust and other factors caused, you can replace the CPU fan to solve.

Method Five:

The floppy drive is turned off by setting drive A to "None" via the BIOS setting (General A is the floppy drive).

Method VI:

In addition, many motherboard BIOS support a key to turn off the F1 option, the BIOS setup has a wait for "F1" if error, you can close this.