Win7 notebook How to do WiFi hotspot sharing tutorial

If there is only one network cable in the home, but there are two or more laptops need to connect to the network, with software, you can turn the notebook into a wireless router, that is, "WiFi hotspot."

Take Windows7 as an example, in fact, it itself with WiFi and Softap (that is, the virtual wireless AP) function, only to activate them, you can make your notebook become a "WiFi hotspot", so that other notebooks are connected to your laptop online.

Then open your notebook wireless card "switch", as the administrator of the shortcut key win+r→ input "cmd" → return operation. Then enter the "Netsh wlan set hostednetwork mode=allow SSID=BINGLANPC key=binglanwifi" command and press ENTER at the Open command prompt, which enables and sets the virtual WiFi card initially.

PS: This command has three parameters. Mode: Enable virtual WiFi NIC, change to disallow is disabled; SSID: Wireless network name, preferably in English (for example, BINGLANPC); key: Wireless network password, more than 8 characters (this article takes Binglanwifi as an example).

When you are in "network connection", you see a wireless connection 2 called "Microsoft Virtual WiFi Miniport Adapter", which indicates a successful opening. To distinguish it from other network adapters, rename it to "virtual WiFi."

Next, it's connected to the Internet. In Network Connections, right-click a network connection that is already connected to the Internet, and then select Properties → share → to allow other ... Connect (N) "→ Virtual WiFi". And after you click OK, the "share" word appears next to the shared network card icon.

PS: A shared access error code could not be enabled at this time: 0x80004005: Error not specified, when you encounter this situation, right-click Computer on the desktop, select Manage → in the left menu bar, double-click to open the services and Applications menu → select "Services" → on the right to find and select "Windows Firewall" → Click "Enable this service", and then do one more of the above section of the operation can be.

Next, run from the command prompt: Netsh wlan start hostednetwork, which opens the wireless network.

PS: When you change "start" to "Stop", you can turn off the wireless network.

Finally, the virtual WiFi's red fork disappears, which means the WiFi base station has been built. Then, other notebook search wireless network "BINGLANPC", enter the password "Binglanwifi", can share the internet!

PS: Many people say this method is not workable, please check your network card to support

cmd command line input netsh wlan show drivers

"Yes" or "No" is written after the supported hosting network. No, this method won't work.

        Note : More attention to the computer tutorials column, Triple Computer Office Group: 189034526 welcome you to join the