1. When the wireless network connection is limited, the protection software needs to be turned off to allow the wireless network to access the extranet. Take 360 security guards for example: Right-click "360 Security Defender" and choose "Exit" from the pop-up menu.
2. Click the "Continue out" button in the open window.
Manually set IP addresses and DNS
1. Enter the "Control Panel"-"Network and Sharing Center"-"Network Connection", right-click on the wireless network icon and choose "Properties" from the pop-up right-click menu.
2. In the Properties window, select "TCP/IP V4" and click the "Properties" button.
3. Then manually set the IP address and DNS.
Ensure wireless hotspots are properly accessible to the network
1. For the use of the router to serve as a wireless hotspot, you need to ensure that the wireless router can normally access the network: Open the "Run" dialog box, enter "CMD" into the Msdos interface.
2. Use the "PING" command to access any Web site, if there is a return of bytes, indicating that the network can be normal access.
3. For hotspots created with the "Shared Sprite" and "Cheetah free WiFi", it is recommended to replace the other hotspot creation tool to recreate the hotspot to try to recommend access to the wireless hotspot.
4. Can also use the trend to the USB monitor to repair the computer to the wireless network card disabled, so that the normal use of wireless networks.
5. Run the software and check the "Disable Wireless card" item in the main interface of the program.
6. Then uncheck the "Disable wireless network card" item. This way the wireless card is normally turned on.
7. Finally, you can try to create a wireless hotspot operation again.