Win7 system Open blue screen code 0x00000f4 what to do?

When I opened the Win7 computer in the morning, the computer appeared blue screen (as shown below), and the display of the blue 0x00000f4 code, and then automatically restart the computer, how about blue screen code 0x00000f4 how to do?

Edit Answer: Blue screen code 0X00000F4 may mean that the hardware has failed, which may be caused by a faulty hard drive or memory. However, it is not absolutely certain that, because there are a few other reasons, it is recommended that the following steps be taken to eliminate and solve the problem.

We recommend that you exclude steps: (first soft after the hard step)

1. If running the software causes an error, it is recommended to reload the software to confirm the problem, if the software is not compatible with the system, then you may need to uninstall and replace the operation.

2 whether there are other software running at the same time causing the conflict or the host configuration memory too small cause memory overflow or exhaustion (try to increase the memory confirmation problem).

3. Check whether the recent reload or upgrade the relevant driver or BIOS, it is likely that the driver is not compatible with the original drive unloading load. (especially for graphics cards, motherboard drivers)

4. If the first three points are excluded, it is likely to be a hardware problem. To determine if it is a hardware failure, it is recommended that you format the hard drive, reload the system, see if it is normal, troubleshoot viruses, and system-related failures.

5. Hardware problems, mainly check the hard disk and memory, check the memory metal is oxidized, if the installation of more than two memory, remove one or change the memory slot. Other motherboards, power supplies, heat dissipation and other conditions to be also troubleshooting.