WIN7 system prompts corrupted file Unable to read analysis and resolution

Computer in use will inevitably encounter some system error problems, recently, a user found that the Win7 system desktop in the lower right corner of the "corrupted file" error prompts, resulting in some programs can not read the problem, if the user does not pay attention to this fault phenomenon, may also appear more serious system problems, So what is the cause of file corruption and how to solve it?

If the above phenomenon is most of the hard disk partition table damage, resulting in the hard disk partition information can not be read by the system, will appear like the hard drive was not formatted when the illusion. If you still want the data file in the hard disk, please do not write any and format the hard disk at this time. Find a data recovery tool that supports RAW format. such as Easyrecovery, can help you retrieve those precious data. Of course, this process needs to be done on another hard drive with no problem, and the failed hard drive is "from disk." The following are some of the other solutions found on the internet, some of which are mostly soft failures of permissions issues.

The solution for the "corrupted files" prompt under the Windows7 system is as follows:

First, we look at the Win7 system on the contents of the prompts to determine where the file directory, is due to what the program caused. As shown in the following figure, the picture illustrates the awc.exe-corrupted file, and here you can see the specific path to the file corruption. The information here has been very detailed to tell us the corresponding directory under the corresponding program damage.

Second, the next use of our Win7 system to deal with the solution, run the Chkdsk tool to solve this problem. In the Start menu, we start the Run dialog directly, then enter the cmd command to open the command prompt.

Third, then at the win7 system command prompt, enter the command chkdsk/f, and then click the Enter key to repair. In the following pop-up prompts, select Y on the line, and then close off the window. It's time for everyone to restart the computer and then run the program just now.

It's worth emphasizing: be careful not to format and then scan the hard disk with software, because formatting will only destroy the data again. Don't use this command. If you must use this command, please back up the MFT or do the entire partition mirror. Because the Chkdsk repair has a certain risk, it is possible to fix the failure to cause the data to be completely lost.

About the system pop-up "corrupted files, unable to read" Error prompt window is introduced here, I hope that through this article on the damage you have encountered a more in-depth understanding of the document and solve.