WIN7 system prompts IP address conflict how to do

Win7 system users who often use routers should know that the router has two ports, one is a WAN port, the other is a LAN port, the WAN port has only one IP address, but the LAN port has more than one IP address. The LAN port address here is actually the IP address of the LAN. And we are connected to the wireless network, routers are assigned to the device is also the LAN IP address, because the LAN IP too much, it is easy to appear IP address conflict, so for such a problem how should we solve? Today's small make up to share with you under the notebook special win7 system in the local area network suddenly appear IP address conflict resolution Method!

The method is as follows:

1, check the conflict of IP, to see if there are changes, you can try to set up automatic access IP address;

2, the other side with limited software to limit the user's speed, you can use 360 security software, open 360 of the ARP firewall or install an ARP firewall;

3, the use of the route may be shut down a restart or directly to the router to restore the factory settings, and then reset to automatic IP;

4, two computers are in the Trojan;

5, the other side of the IP and the user's conflict, may be caused by the other side of their own modifications, but also may be poisoned;

6, because the user has unplugged each other's network cable, it can be used normally, the problem should be out on the other side of the computer.

The above is the notebook special win7 system in the LAN under the sudden emergence of IP address conflict resolution, users in the face of IP address conflict, may wish to refer to this article, I hope that we can help!