WIN8 Fast installation of wireless network card method

first, the system can be identified and used directly (without installing the driver)

Because the Windows 8 system is integrated with many network card chip drivers, most wireless cards can be used directly on Windows 8 systems without the need for manual installation of drivers. The specific use of the following methods:

1. Plug the Wireless card into the computer, the system will find hardware and automatically install the driver, a moment later, right click on the desktop "Computer" and select "Management."

2. Click Device Manager, you can see that the network card has been properly identified.

3. Left click on the desktop in the lower right corner of the wireless network connection icon, you can open the wireless signal list. Select the wireless signal that corresponds to your wireless router and click the Connect button.

4. Enter the password of the wireless signal and click Next, wait a moment after the wireless way to the Internet.

After testing, the following network adapters are normally recognized by the system on the Windows 8 32-bit Enterprise Edition:

TL-WN721N 3.0

TL-WN723N 2.0

TL-WN725N 1.0

TL-WN727N 3.0

tl-wdn3321

TL-WN821N 4.0

tl-wn823n 1.0

　Second, the need to manually install the driver to use

Some wireless cards may not be recognized by Windows 8 systems after they have been plugged into the computer for a period of time. At this point, you can try to manually install the network adapter to the Windows 7 system driver to see if it is working properly. The specific methods are as follows:

1. Download the network card on the website corresponding to the Windows 7 system driver.

2. Right-click on the yellow-labeled device in Device Manager to select "Update Driver software".

3. Select "Browse the computer to find driver software".

4. Click "Browse", locate the folder where the driver is located, and click "OK".

5. Click "Next".

6. If you have other prompts, select Always install this driver software.

7. Successfully installed drive.

8. After the successful installation of the driver, the Device Manager's network adapter will normally display this wireless network card device, and then you can search for wireless signals and connections to achieve wireless internet.

The following wireless network cards are currently installed on the Windows 8 32-bit Enterprise Edition and are available after installation by this method:

TL-WN722N 1.0

tl-wn721n 1.0

Tl-wn322g+ 2.0

Note: A small number of wireless network cards such as tl-wn821n 1.0/2.0, tl-wn822n 1.0 and so on temporarily do not have Windows 8 system driver, can not achieve under the Windows 8 system use.

If your wireless card can be automatically identified by Win8, that's a lot less trouble, but if you can't recognize it, it's okay, Win8. The steps to install a wireless network card are simple and fast, and after the driver is successfully installed, the system will automatically identify your wireless network card, connect to the wireless networks, so that you do not worry about the Internet.