Win8 How to set up the way to connect to a wireless network

Win8 setting the way to connect to a wireless network is as follows:

Programme I:

1, to ensure that the computer has a wireless network card, and wireless network card driver installed correctly and in the open state.

2, wireless router or wireless network environment is normal.

3, found the network icon on the desktop. Right-click to select Properties.

4. Select "Set up a new connection or network" in Network and Sharing Center.

5. Select "Manually connect to the wireless network" and click "Next" If you do not have this option, check that the wireless card is normal or disabled.

6, fill in the input box "network Name" (This should fill in the wireless network SSID), according to the actual wireless network encryption way to choose the right "security type." "Start this connection automatically" is checked against actual requirements. For the network environment where the SSID is hidden, you need to check "connect even if the network is not broadcast." When you are finished, click Next.

Note: In addition to No authentication (open), selecting a different security type will automatically check automatically to start this connection by default.

7, click "Change connection Settings" view.

8, you can see that the SSID of the wireless network and "Network name" is consistent. So the network name must be the SSID before.

Programme II:

1, click on the lower right corner of the network connection icon.

2, the right side of the screen will list the current search to the network connection. Select the network you want to connect to, and then click.

3, select "Connection".

4, enter the password and then click Next.

5, according to the actual network situation to choose the network environment.

6. Successful connection.

Note: The password security type and encryption type cannot be set in this way. If there is a special encryption method in the router, it needs to be set in the way in scenario one.