WIN8 system How to set up a wireless sharing tutorial

Teach you how to set up Windows8 wireless sharing. Let two or more notebooks through one of the laptop cable (of course, wireless also line), wireless Internet access, the principle is to use the notebook's built-in wireless network card to establish a virtual AP set a wireless coverage hotspot. Method One, do not need any software to only need to set up on the computer can, recommend like to use the people who toss.

First, there are two conditions for setting up hot spots:

(1) The system is WIN8 Internet-accessible computer (with XP fast change it, hehe)

(2) wireless network card to support the host networks (preferably updated to the latest wireless network card driver)

Set the steps as follows:

WIN8 's virtual base station features a computer that can access the Internet (and, of course, a wireless network card) into a wireless base station, sharing a network connection.

1. What do you think of your network card support does not support hosting networks? Administrator mode run cmd enter command line netsh WLAN show drive if support is displayed as Yes.

2. Build the host network input netsh wlan set hostednetwork mode =allow ssid= you want to use the name (such as HJQ) key= the password you want to use (for example, Huangjianqiang seems to have the password at least 8 or 13 digits) Tip Hosting Network Settings succeeded

3. At this point in the network and Sharing Center change adapter settings can see a number of virtual network card "Wireless network Connection 2" Microsoft virtual WiFi miniport Adapter.

At this point in the local connection of the network card properties to choose to share, Pull-down menu to select the Wireless network Connection 2, and then choose to share, two to tick points on.

4. Open Wireless Card Enter command line

Netsh wlan start hostednetwork boot hosting Network

5. With other computers or mobile phones, start scanning WiFi with the password you set to log on

6. However, each boot of this site will not automatically start, but also to manually start, is as described as the administrator in the command prompt character again run the Netsh wlan start hostednetwork. But the way I did it was to create a batch file and use Notepad to enter the following: Netsh wlan start hostednetwork, saved as "open virtual Base station. Bat"

However, there is a problem, that is, this command only Administrator permissions to work properly, so you open the wireless card, click the right mouse button "Run as an administrator."