win8.1 how to reload Win7 system

　win8.1 how to reload Win7 system

First, Attention matters:

1, the following settings will be uefi+gpt to legacy+mbr, need to convert hard disk partition table type

2, the entire hard drive data will be lost, need to backup

Second, HP notebook win8.1 reload Win7 steps:

1, restart the notebook, appear in the boot screen press F10 into the BIOS settings, other models need to press ESC and then press F10;

2, move to System Configuration, select boot options, press ENTER enter;

3, select Legacy Support, press ENTER to modify to "Enabled", and then the secure boot modified to "Disabled";

4, press F10 to save BIOS setup exit;

5, insert U disk boot disk, restart the system, press and hold F9, in the boot Manager select U disk options such as Kingstondata, press ENTER;

6, if the installation of the original Win7, then in the installation interface press SHIFT+F10 pull up the command prompt;

7, in turn, enter the following command, each command to be carried out by return, the hard disk into MBR format;

DiskPart

List disk

Select Disk 0

Clean

Convert MBR

Exit

8, to return to the installation interface, repartition hard disk installation;

9, if is installs Ghost Win7, then enters the PE system to open Diskgenius;

10, use Diskgenius to convert the hard disk partition to MBR format, reboot for Win7 system installation.

11, hard disk partition table conversion and U disk reload win7 System. WINDOWS8 Tutorial