Winpe_u disk installation system

 

Illustration! How to install XP system on USB flash drive winpe

I am not talking much about it.

Preparations: One USB flash drive of 1 GB or more,

Winpe tool one, personal recommendation old peach winpe, http://www.duote.com/soft/8624.html

Ghost Image File (needless to say, you must know about the USB flash drive installation system)

You can start: Insert a USB flash drive (it is best to clear the items in the USB flash drive and save them by yourself)

After downloading the file, decompress the winbootfile, find pesetup.exe in the left, and click

Select 4th items and press Enter.
Enter the drive letter of the USB flash drive and press Enter.
In the formatting step, click "start" on the default settings.
Smooth formatting
In the guide section, there are two options in the "device", one is the hard disk of the computer, and the other is the U disk to be made. You must select the right USB flash disk instead of the wrong hard disk. The size of the USB flash disk can be determined. The author's USB flash drive is 2 GB, so we should choose (hd1) [1898 M]. You can skip the "options" section below. By default, no parameters are selected. After confirming the above steps, click "Install ".

And then proceed to the next step.
After writing the boot, press any key to continue.
I want to set a password for the boot USB flash drive. I didn't want to set a password for the boot USB flash drive, but this step cannot be skipped, so I had to set a password. After setting the USB flash drive, remember the password you set. Otherwise, the USB flash drive cannot be used.
After completing the above steps, congratulations, a USB flash drive with the startup function has come to you. You no longer need to worry about starting the drive from the drive, because you can start the drive from the USB flash drive and then install the operating system! Do you want to know how to perform this operation? The next page begins. ● Set the first boot item of the computer as a USB device to start the previous Light Disk System, and the boot item must be adjusted to Drive boot. Now we need to install the system with a USB flash disk, so we need to change it to USB flash drive boot. Different BIOS versions on different computers have different settings, but they are similar in that the purpose is to change the first boot item of the computer to a USB flash drive. The following describes how to adjust the BIOS.
The most common BIOS option for Phoenix-award, just select the USB-HDD
BiOS adjustment options for Dell brand machines
Bios of the ThinkPad series notebook
The bios of HP commercial series laptops can be seen that the above BIOS options are different, but the adjustment options are for one purpose: Set the boot item of the computer to start from a USB device, in this way, the computer can be started from the USB flash drive. ● Install XP with an Enable USB flash drive
First, connect the USB flash drive with the boot function to the computer.
After starting the computer, you will be asked to enter the password for starting the USB flash drive, that is, the password you set when making the USB flash drive. After you enter the correct password, you can see a selection menu and select "winpe by: maotao ".
Enter winpe and then enter winpe, a mini operating system running on a USB flash disk (not a computer's hard disk). It has many functions similar to XP, with it, we can do whatever we want on the computer.
How can I Format disk C as needed? Can I directly format the drive C? Before installing the new XP, We must format the drive C. For the installation of the xp cd, we chose a ghostxp_sp3 computer company's quick installation version v13 we downloaded earlier to start winpe's ghost. Then we started another winpe's built-in software, Norton Ghost. Use it to restore the system's ghost image to the C drive of the previously formatted computer. :


Select xp. gho from the file decompressed by ghostxp_sp3 computer rapid installation v13 (ghostxp_sp3_pro_v13.iso. Click "open.



After the preceding settings are selected, a dialog box will pop up asking you if you want to restore the specified gho image to the C drive of your computer. Click Yes.
Click Yes, just wait until it is restored.

Restart to enter the system. After Reinstallation, after the ghost image is restored, it can be restarted to enter the system. Now, the operating system has been installed with a USB flash drive! You can forget the troubles of installing the operating system without the optical drive. It is worth mentioning that, because the entire process is to read data from the hard disk, the installation speed is much faster than the installation speed with a CD. In fact, this is only one way to install the system with a USB flash drive. There are many other ways to install the system. This article will not give an example one by one. You may have noticed that with this USB flash drive, you do not have to worry about the system crash. After the important information is stored in drive C, it cannot be saved, because as long as you use the USB flash drive to start winpe, you can back up important data to other partitions. It is hoped that netizens can use winpe, a very useful tool installed on a USB flash drive, to draw a line between them.