WinXP to AHCI no longer blue screen, do not change the registry, all PC Universal

To use the Win8 PE

In general, the hard drive defaults to native IDE mode in BIOS for best compatibility. In the W7,W8 system with high requirements, the performance of the hard drive can be improved to some extent by turning on the hard drive AHCI mode. If you install W7 in IDE mode and then change the hard drive in the BIOS to AHCI mode, you cannot enter the system, you need to reinstall the system, and the registry is not necessarily compatible, because ghost is much simpler.  Is there a way to open the AHCI mode of the hard drive without reloading the system? The answer is yes.

1. If our system is already installed, the IDE mode is displayed.

2. Now if we convert the IDE mode to the AHCI mode open blue screen, prompt 0x000007b

3. To solve this problem, first we need to enter the BIOS to change the hard drive mode inside the BIOS to AHCI mode

4. In the please out of our protagonist, it Sky SKYIARAHCI Drive collection, software visible reference

Here is a hint: This software must be in the PE system movement (should everyone know what is called pe ...) ）

We are going into PE this time to run this software, automatically select the AHCI driver you need, then click Start, and then wait for the import finished, only need 5 seconds, restart the computer, you can

5. Then the system becomes the AHCI mode

WinXP to AHCI no longer blue screen, do not change the registry, all PC Universal