Wireless Router security settings

First step, line connection

Telephone service for you to open ADSL services, will provide you with a "broadband cat", you will first connect the wall out of the phone line to your broadband cat's ADSL interface, and then use a network cable to the broadband cat LAN port and the router's WAN port connection. Finally, you use a network cable to connect the router's LAN interface to your computer's network card. This will be the wiring before the installation of the work done, of course, these devices must be powered on Oh, if everything is normal, you should be able to see the mouth you just connected, there are lights.

The second step, the preparation before setting

Look at the back of the router to find the router's factory-set IP, and the default username and password, in this case the Tplink route default IP address is "192.168.1.1", username and password are "admin". If this information is not on the back of other routes, you can flip the instructions and there must be a place to write that information.

Know the route default IP, we need to set the computer network card IP address, the computer and routing of the IP needs in the same network segment, or it may not be able to communicate oh. It doesn't matter if you don't know what the same network segment means. Just follow the IP of the route, and the last one set to be 1 to 254 and the last number of routers.

Step three, set up the router

Open the computer's IE browser, in the address bar input http://192.168.1.1, enter. There is an interface for you to enter your username and password? If so, congratulations. The above steps are correct. If not, check to see if the above steps are done correctly. Of course, you can also contact the engineer of the Hundred Si.

When you enter the user name and password correctly, enter the following interface, we began to work on the specific settings.

1, click the Settings Wizard, click Next.

2, select PPPoE (ADSL virtual dialing), and then click Next;

3. In the following window correctly enter the Telecommunications Bureau to provide you with the account number, password, click Next.

4. After the setup is complete, the route will be automatically dialed and connected to the Internet. You can see in the Run status window that the prompts are connected and that the IP address is assigned.

5, enter the wireless setup interface. Wireless Status Select "Open"; The SSID is set to your liking, which is to give your wireless network a name. Other parts do not need to be set; Wireless security option WPA-PSK/WPA2-PSK, password requires more than 8 digits, it is recommended to try to set a not easy to guess.

Click Next and you will be prompted to complete the setup;

6, in order to be more secure, to prevent others from rubbing the net, or scanning our wireless password. We can also set up MAC address filtering. In wireless settings, select MAC address filter, filter Rule Select Allow, add the MAC address of the device we want to use wirelessly, and select Enable filter. In this way, devices that are not added will not be able to communicate with our wireless.

7, down we set the network speed limit, into the "IP bandwidth Control"-"Control Settings", choose to open IP bandwidth control, ADSL line bandwidth using the default value can be.

8, into the "IP bandwidth Control"-"control Rules", add new entries; check "Enable", address segment set to 192.168.1.2-192.168.1.254, port segment set 0-65535, protocol Select all, uplink minimum bandwidth set to 50, maximum bandwidth settings 60 ( Do not set large, ADSL upload speed is very small), downlink minimum bandwidth of 150, the maximum bandwidth of 200 (in 2M network calculation);

9, finally, we must also enter the "System Tool"-"Modify the login password", changed to a only you know the password, so that others can not arbitrarily tamper with the routing settings.

There is no line to be completed by the setting. Of course there are a lot of more detailed settings, you can also try, have a question welcome you to contact with the Hundred SI Engineers.