Wireless router settings: Route list and static route

1 route list

The core route table of the current vro is displayed on this page.

The main task of a vro is to find an optimal transmission path for each packet passing through the vro and transmit the data to the destination site effectively. In order to do this, the route table of the transmission path is stored in the vro, which is used by the vro.

2 Static Routing

This page is used to set the static routing function of the router.

Destination network IP address: the target host or IP network segment to access.

Subnet Mask: Fill in the subnet mask, which is generally 255.255.255.0.

Gateway: the IP address of the next hop router entry.

Note:

1. the gateway must belong to the same network segment as the LAN port IP address of the router.

2. If the destination IP address is a Host IP address, the subnet mask must be 255.255.255.255.

3. If the destination IP address is an IP address segment, it must match the subnet mask. For example, if the destination IP address is 10.0.0.0, The subnet mask is 255.0.0.0.

Have you learned how to view route tables and static routes in Routers? It is not very easy. You can easily implement it when you need to use this information, so you don't need to find someone else.