XP system prompts delay write failed file may be corrupted or missing

XP system prompts delay write failed file may be corrupted or missing

Through a large number of computer research, the main causes of the above failures are three kinds, 1, the frequent forced shutdown operation, 2, System file error, 3, the hard drive has bad way caused file error. 4, the memory failure for these several reasons, System box small series to explain the solution respectively.

One, many times to force shutdown or off normal restart caused

1, click on the lower left corner menu, select Run Options, and then input cmd, and enter;

2, in the cmd window input: CHKDSK C:

Second, System file error

1, open My Computer, open the local disk properties, in the pop-up dialog box select "Tools"-"Start checking",

2, in the Check Disk dialog box. Check the following two items, (XP system download Www.xitonghe.com/XP). If you can't fix it, look down.

3, open the Local Disk Properties dialog box, find the "hardware"

4, open the Policy dialog box, the "Enable write cache on disk" before the check.

Third, the hard drive appears physical bad way

Because the long-term use of the hard disk will be like a disc on the disk surface scratches, but the image of the analogy is not so serious, XP system is unable to deal with disk physics bad way, at this time the best once and for all the solution should be to replace the hard drive. The following small series first teach you to test your hard drive bad road strict not serious.

1, the use of U disk Startup disk or start CD, running inside the MHDD bad track detection tool;

2, and then select the hard disk you want to test, input serial number and enter;

3, the input scan appears after the small window presses the F4, starts to detect the hard disk.

4, appear red Small block or red fork is bad way, generally if the disadvantage in the beginning of the disk, hard to fix, even reinstalling the system can be very error-prone, and if the bad path is not much, and in the latter part can be used to screen the partition software, compared to the previous or later can be measured by the percentage of hard disk, according to the small series of experience The disk cannot be used as a system disk when there are too many bad words 10% ago.

5, if the bad way is not a lot, we can also use Diskgenius partition software to isolate bad areas, we enter the PE enable "Partition Tool Diskgenius".

4, through just the results of the test, calculate the capacity of the bad road. Use zoning tools to separate out the bad parts. Separate the good points and use them, but the important data should not be put on this hard drive.

Note: The physical bad will spread, if the hard drive is still under warranty, please as soon as possible warranty.

Four, memory failure

Memory as an important part of data exchange in the system, if there is instability then the exchange of the file is likely to appear bad, error, due to the specificity of memory, generally found that memory problems can only be directly replaced to deal with.