Xshell How to connect serial

The RS232C serial connection replaces the original terminal to connect with the PC without a video card on the UNIX system or directly to the controller, which is very convenient. If you want to use the SERIAL connection through Xshell , you should install the serial interface (SERIAL Interface) on the host system.

How to perform the serial connection procedure is as follows:

1. Select "New" on the "File" menu. The new Session Properties dialog box appears.

2. Enter the session name in "name".

　　

3. Select serial under the "Protocol" directory.

4. Select "SERIAL" in "categories".

　　

5. In the "Port" entry, select the RS232C serial port number that is connected to the PC that has Xshell installed.

6. Under "Baud rate", select the communication speed, should be consistent with the server value, generally use 9600.

7. Under "Data bits", select the number of bits to send the data units, which should be consistent with the server's values.

8. Under Stop Bits, select the number of digits that display the end of the sending data unit. Follow the server settings to select.

9. "Parity" is used to verify the error of sending data, select one in the None, Odd, even, mark, and space according to the server settings.

10. Click "OK" to create a new session.

11. If the "Xshell through session connection" Unit is described, the session created can be used to establish the connection.

The above is how to use Xshell connection serial steps, is not very simple, just follow the steps to do.

Xshell Download: http://www.xshellcn.com/xiazai.html

Xshell How to connect serial