1. If the checksum of the serial port data is incorrect, the Z-wave node responds to a 0x15.
2.5202,5101 can do both control and equipment side. They are all external antennas, the distance will be better.
In addition 5202 and 5101 can also do routing nodes.
5,304 can only do control, 5304 of the antenna is built-in integration, the distance will be slightly close.
We are now testing with 5,202 Laiji.
The ZW0301 for ANTASY3120 is a kit for the 300 system. It is not considered for the time being.
3. A network from the node can only join a master node, if you are from the node, joined the previous network, then you have to join the current network must be deleted first. The deleted operation is initiated by the master node, and the function is to remove the network that was previously joined from the node.
In addition, after testing, delete the operation, do not need to use the original network in the main node to de-pairing. But if you do this, the information from the node that was recorded in the main node cannot be erased.
So, try to use the original paired main node to remove the pairing, then let this from the node and its main node to pair.
4. There are two ways to remove invalid nodes
1. Send a command such as, then Point is failded, then click Remove Failed.
2. Reset the entire controller
5.5202 and 5101 configurations can be configured as routing nodes
In the <<ins12366-8-working in Series environment User guide.pdf>> this document
Like what
6. Z-wave Beginner's Guide
Ins12613-getting started.pdf
7. Z-wave Serial Protocol Documentation
Ins12350-4-Serial API Host Appl. Prg. Guide.pdf
8. Z-wave Serial API documentation
Ins12308-6-Z-wave Series Appl. Prg. Guide V6.51.03.pdf
9. Z-wave Command Classes and command documents
Sds12657-5-Z-wave Command Class specification, a-m.pdf
Sds12652-6-Z-wave Command Class specification, n-z.pdf
10. About the routing slave node, the most important difference between routing slave node and slave node is that it can forward messages like other slave nodes, not just as route forwarding nodes
Sds10243-8-z-wave™protocol overview.pdf