Establishing a network connection in Windows Mobile emulator

Because you want to use Windows Mobile Emulator to test network communication programs, find ways to configure emulator network connections. Find some articles on the internet, many say that you need to install Virtual PC 2007. For example, the following article
Enable Receptacle Connection Windows Mobile 6 Emulator

If you need Virtual PC 2007 can be downloaded here
http://www.microsoft.com/downloads/details.aspx?FamilyID=04d26402-3199-48a3-afa2-2dc0b40a73b6&DisplayLang=en

My configuration proves that virtual PC 2007 does not need to be installed, as follows:

1. Configure the emulator receptacle, enable enabling NE2000 PCMCIA receptacle Adapter and bind to: and select the real network card on the PC.

2. Open Start-> Settings-> 50x15 Tab-> 50x15-> Receptacle Cards

3. Click NE2000 compatible Ethernet driver view IP address information, the system will bind the address of the PC Internet card. The address on the PC is 192.168.1.49.

4.Start-> Settings-> 50x15 tab-> 50x15-> Advanced tab-> Select NX Select "My Work receptacle" , the My Work receptacle represents the configuration of figure two.

5. Open the browser and visit Google for testing.

6. Visit the Aps.net website on your PC for testing. The address on the PC is 192.168.1.49.

This allows emulator to test and access Internet systems for network communication programs.