CentOS

Ifconfig ... did not see eth0. Then restart the NIC and report the following error.Failure phenomena:Service Network restartShutting down loopback insterface: [OK]Bringing Up loopback insterface: [OK]Bringing up interface Eth0:device eth0 does no

First, prefaceMost of this article is for reference:http://www.cnblogs.com/mchina/p/centos-pxe-kickstart-auto-install-os.html Mainly used for learning.1.1 What is PXEPXE (Pre-Boot execution Environment, pre-boot execution Environment) is the latest

Modify the SSH default remote connection port to 33331. Edit the firewall configuration:VI /etc/sysconfig/iptablesFirewall New Port 3333, the method is as follows:3333 -j ACCEPTSpecifically, this is done:==============================================

Centos/linux connecting iSCSI Magnetic Consolidation ColumnsISCSI: Internet Small computer System InterfaceSystem environment: CentOS 6.5 MiniDisk array: Lenovo EMCISCSI ip:192.168.100.201First, install iSCSI1: Verify that iSCSI is installed# Rpm-qa|

Afternoon to night time, bought a Linux server, with the CentOS system, encountered various problems!1, with Putty,ssh to the VPS, according to the online command, step by step download and installation, concrete steps can look at the online

I worked on it all afternoon. Don't turn off the firewall. Don't do anything. Look what I said. I don't know, you can add me qq:2857650052.Always welcome.Time: 14/11/14--21.28Purpose: Use the CRT and the virtual machine to connect to the Linux

The number of CPU instruction sets have kept growing, and likewise for the operating systems which is able to run and supp ORT on more than one CPU system architecture. For example, a Linux OS such as Ubuntu, Fedora, Redhat, Linux Mint, Debian, Arch

Original: http://yuweiqiang.blog.163.com/blog/static/6657041201110111539474/1. Close X Window at the image interface:1.1 Shell runs init 3 into text mode and closes the associated service (Xserver definitely off)1.2 Alt+ctrl+f1~f6 to character

Refer to two articlesThe first half of the http://www.centoscn.com/CentOS/config/2014/1124/4170.htmlhttp://ju.outofmemory.cn/entry/63491 in YumUpdate-y - YumUpgrade-y to Yum Install GCC GCC-c++ xz BC ncurses-devel + Yum InstallHmaccalc

(1) System ArchitectureView KernelShell Code # Uname-s-R Linux 2.6. 32-358.el6.x86_64 View Release versionShell Code # Cat/etc/redhat-release CentOS Release 6.4 (Final) View CPU ArchitectureShell Code #

Company colleagues with the Ubuntu system, automatic completion of the function is good, but my CentOS 6.6 system using sudo can not be automatically complete, git command can not be automatically complete.Search online for a workaround as follows.A

Loading and Writing moduleLoadModule rewrite_module modules/mod_rewrite.soAdd configurationThe third line above has an absolute path, which is used to map subdirectories, depending on what directory is dependent on the server.Restart Apache service

Network environment: Two IP addresses, 192.168.0.10 and 10.10.30.2, the mask is 255.255.255.0, and the gateway addresses of these two subnets are 192.168.0.1 and 10.10.30.1 respectively.1. Configure the IP address 192.168.0.10 for the NIC eth0,

Environment: CentOS6.4 64I. Installation Epel-relase#yum Install epel-release Modify /etc/yum.repo.d/Epel.repo will#baseurlMirrorlistChange intoBaseURL#mirrorlistInstall the R language#yum Install RInstalling Rstudio Server# sudo yum install openssl0

Git is available in the default repository of centos, so the simplest method is: $ sudo yum install git   This method is simple, but the version updates in the repository are not timely. For example, the latest version of git in the centos

Tar zxvf ncurses-5.6.tar.gz into Directory CD ncurses-5.6Generate the MAKEFILE file,Further Compilation./Configure -- prefix =/usr -- With-shared -- without-Debug compilation. The compilation time is longer. Please wait.MakeAfter compilation, the

How to reset the Root password of CentOS 7 The CentOS7 virtual machine has not been used for a while, and the root password does not exist. The method for modifying the root password found on the internet is recorded here. 1-In the Enable grub menu,

Centos 6.5 installed with zebra-0.95, centoszebra-0.95 1. Install zebra [Root @ CentOS test] # tar -zxvfzebra-0.95a.tar.gz Modify zebra. h [Root @ CentOS zebra-0.95a] # vim./lib/zebra. h Add the following in row 103: # Ifdef GNU_LINUX # Define _ USE_

Recover Windows boot after CentOS 7 Installation As soon as the official CentOS 7 version is available, I installed it and found that Grub2 cannot guide windows partition correctly like REDHAT 7. The solution is simple. Vim/boot/grub2/grub. cfg

Modify language environment[[Email protected] ~] # Sudo vim/etc/sysconfig/i18n change zh_CH to "en_US.UTF-8"Build yum local sourceReference: how to install software in centosVsftpd installation configurationRefer to CentOS for VSFTP server