1. Raspberry Pi Initialization configuration

Source: Internet
Author: User
Tags raspi

1 , configuration options:

The first time a Raspberry Pi is used, a simple configuration is required to run the following command in command-line mode:

$sudo Raspi-config

The new and old version of the configuration interface is not the same, the following list of two kinds of more common:

    • Expand_rootfs – Extend the root partition to the entire SD card (the Raspberry Pi does not use the entire space of the SD card by default, a portion is reserved, recommended)
    • overscan– can expand or reduce the screen (the old version can not adapt to the screen, the new version does not have this option, it seems to be adaptive, not carefully studied)
    • configure_keyboard -keyboard Configuration Interface
    • Change_pass -The default username is pi, password is raspberry, use SSH remote connection or serial login to use this user name and password, here you can change the password.

. Change_locale – Change the language settings. In locales to is generated:, select en_US. UTF-8 and ZH_CN. UTF-8. In the default locale for the system environment:, select en_US. UTF-8 (after the start of the machine, install the Chinese font, and then change back to ZH_CN. UTF-8, otherwise the first boot will appear square)

Change_timezone – because the Raspberry Pi does not have an internal clock, is the time taken over the network to select Asia–shanghai.

    • Memory_split – The video memory configured for the desktop display.
    • SSH – whether to activate the sshd service.
    • Boot_behaviour – Set the graphical interface to start at startup, and normal is yes.

2) New version (newer mirrors are mostly the interface, making a lot of changes)

1 Expand Filesystem Extended file system (same old version).

2 change user Password changes the default PI user's password, press ENTER after entering the PI user's new password.

3 Enable Boot to Desktop/scratch when booting into the environment selection

Text console, requiring login (default)
Enter character console at startup, login required (default).
Desktop log in as user ' pi ' at the graphical desktop

At startup, go to the desktop of the Lxde graphical interface.

Scratch Start The Scratch programming environment upon boot
Enter the scratch programming environment at startup.

4 Internationalisation Options internationalization option, you can change the default language
I1 Change Locale
Language and regional settings, it is recommended not to change, the default English is good. To change the Chinese language, it is best to install the Chinese font to do this step, the way to install Chinese fonts:
sudo apt-get update
sudo apt-get install Ttf-wqy-zenhei Ttf-wqy-microhei
move to the bottom of the screen, use the SPACEBAR to select ZH-CN gb2312,zh-cn gb18030,zh-cn UTF-8, then press ENTER, then select ZH-CN in the default language and enter
I2 Change Timezone
set the time zone, and if you do not set it, the pi is not displayed properly. Choose Asia and choose Chongqing (Chongqing).
I3 Change Keyboard Layout
Change the keyboard layout

5 Enable Camera
Start the PI camera module, if you want to enable, select Enable, disable the selection of disable on the line
6 ADD to Rastrack
Add the location of your pi to a map of the world that opens this option, or do not open it, lest it be followed.
7 Overclock

None overclocking, running at 700Mhz, core frequency 250Mhz, Memory frequency 400Mhz, no increase in voltage
Modest moderate overclocking, running at 800Mhz, core frequency 250Mhz, Memory frequency 400Mhz, no increase in voltage
Medium Medium overclocking, running at 900Mhz, core frequency 250Mhz, memory frequency 450Mhz, increased voltage 2
High-height overclocking, running at 950Mhz, core frequency 250Mhz, memory frequency 450Mhz, increased voltage 6
Turbo Ultimate Overclocking, running at 1000Mhz, core frequency 500Mhz, memory frequency 600Mhz, increased voltage 6

8 Advanced Options Premium Settings

A1 Overscan whether to make screen content display full screen

A2 Hostname host name that can be seen on the network neighbor or router
A3 Memories Split Memory allocation, select how much memory to GPU
A4 ssh to run SSH login, it is recommended to open an account this option, after the operation of Pi convenient, network on the line, do not open the screen.

A5 SPI whether the SPI core driver is enabled by default, the novice will have no control.
A6 Audio Select whether the sound is output to the analog or HDMI ports by default
0 Auto Selection
1 Force 3.5mm (' headphone ') Jack forces output to 3.5mm analog port
2 Force HDMI forced output to HDMI

A7 Update automatically upgrades the Raspi-config tool to the latest version

9 about Raspi-config about the Raspi-config the information.

After the configuration is complete, the system will be restarted and the option can take effect.

1. Raspberry Pi Initialization configuration

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.