1433 port ing Tutorial: Explanation of common Routers

Fire Network (LieHuo. Net) Router Tutorial:Remote remote connection is implemented. If the server computer accesses the Internet through ADSL + vro, You need to configure port ing in the vro on the server computer. The setting method may vary depending on the brand and model of the vro. We have collected and summarized some common ADSL port ing methods. Please refer to the relevant models for configuration.

I. configuration of port ing FOR THE middleware wide sercomm IP505 (LT/LM/T) series routers
1. In the browser, enter 192.168.1.1, user/password: adsl/adsl1234, or root: 12345. The local network address is 192.168.1.2, enter the NAT settings of Services, and select nat rule entry from the drop-down box.
2. Click Add. In the pop-up page, select BITMAP in rule flavor. In rule id, enter a value greater than 1433, if name select PPP-0, local address select your address in Lan,
For example, I am 192.168.1.2, and the following 0.0.0.0 does not need to be handled. submit it.
3. select Commit & Reboot in the Admin option and click Submit. The options will be saved all the time.

2. settings of vro port ing for TP-Link R4 * 0 (for example, 410)
1. Open IE, ENTER the router address in the address bar, for example, 192.168.1.1, and ENTER
Fill in the logon name and password in the pop-up window. The implied logon name and password of R460 are both admin in lower case, and then click OK.
After you enter the correct login name and password, IE will go to the R460 WEB page and display "multi-function broadband SOHO Router" in the middle of the screen. In the left-side menu bar, "Running status", "setting wizard", "Network Parameters", "dhcp server", "forwarding rules", "Security Settings", "routing functions", "System Tools", and "product features" 9 menu.
Click "virtual server" under "forwarding Rules". Go to the "virtual server" Settings page and find two blank protocols. 1. Enter the TCP port 1344 to be used.
2. Fill in the last section of your intranet IP address. For example, if your intranet IP address is 192.168.1.2, enter 2 here.
3. Check and enable the service.
Click "save", save the configured settings, and restart the router. The port ing is complete.

3. settings of TP-Link td8830 router port ing
In the IE Address Bar, enter "192.168.10.200" and press Enter. In the displayed logon dialog box, enter the default user name and password "root" to go to the management interface. In the left-side menu bar of the management interface, select Basic Config → PAT to enter the port ing configuration dialog box. In the dialog box, click "Add" to Add a new ing project.
1. In the "Protocol" column, select the Protocol: TCP.
2. In the Interface column, the default value is "LAN". We can also select ATM1 and ATM2 until ATM8. Select ATM1 here (do not select LAN, otherwise the ing will fail ).
3. "Service Name" is used to indicate the ing category and can be input at will.
4. In the Port Number column, enter the required Port Number 1433.
5. "Server IP Address" refers to the private IP Address of the computer on which the Server is set up, which is the current Intranet IP Address of your Server.
After adding the ing project, click "Finish" to complete the settings. Select "Save & Restart" in the left-side menu bar. In the displayed dialog box, click "Save" to Save the settings, and then click "Restart" to Restart the adsl modem (note: be sure to follow this order! Otherwise, the configuration is not saved ).

• Three pages in total:
• Previous Page
• 1
• 2
• 3
• Next Page