5 problems needing attention in the process of mass production operation of USB stick

1, the tool version: Each master plan of the production tools have many versions, as far as possible to see what other users are using which version, the more popular version is often the higher the production success rate, the download of the production tools to see the instructions, in case of mass production failure can be replaced by other versions try again.

2, equipment Conflicts: The amount of pre-natal unplug all other USB devices, or sometimes cause conflict, equivalent production of USB flash drive and these devices in the same set of ports, it will cause conflict, and sometimes make a successful production of the USB stick can not start the computer failure Oh, so it is recommended to unplug all USB devices.

3, Preparation: Mass production first to use the latest version of the Chip Wizard (Chipgenius) to detect the main control type of the U disk, and then download the production tools according to the above link, and then according to the main control model search, the amount of prenatal to be more familiar with the U-disk production process, the amount of prenatal to backup USB flash drive data, especially Once the mass production will destroy all the files on the USB flash drive;

4, USB port: Do not use USB1.1 port, some production tools can not be USB1.1 under the mass production, the U disk directly plugged into the motherboard USB port;

5, close anti-virus software: The amount of prenatal best to shut down the antivirus, because there are mass production tools will be killed soft mistakenly considered a virus, which will also lead to mass production failure.