A graphics and text tutorial on WiFi access to the red meter mobile phone

How to connect the red meter mobile phone to WiFi, red meter phone How to set static IP. Some wireless routers must be in the mobile phone to set up static IP to be able to connect, if you do not, then hurry up and see this tutorial. Dynamic IP is automatically acquired and can be set without setting.

The specific steps are as follows:

1, open the red Rice mobile WLAN switch.

2, click the WLAN network access point name you need to connect to.

3, enter the password, the input method hidden will find "Show password" and "Show advanced options."

4, check the Advanced settings options.

5, the next pull will appear "IP Settings", while the WLAN can be optimized settings!

6. Change DHCP in the option to-static.

7, change to static later, will appear the following items, fill in the contents as follows:

==IP Address: Your mobile phone's IP address, is generally 192.168.1.XXX (XXX can be between 1-255, can not be with the same router under any device to set up a duplicate IP address, or cause IP conflicts will not be normal connection network. )

= = Gateway: Your router's IP address (general router default IP is mostly 192.168.1.1 or 192.168.0.1)

= = Network Front: no changes

= = Domain 1:wlan Access IP address, generally 192.168.1.1 or 192.168.0.1, refer to the settings on the local router

= = Domain 2: The same as the domain 1 can be