Analyze wireless route linksys settings to solve common problems

Analysis of wireless route linksys settings to solve common problems, some people gave answers to the wireless route linksys settings, but not very detailed, there are still many problems about the wireless route linksys settings, hope that experts can provide some wonderful solutions.

1. Use as a wireless route: (applicable to general homes and environments with only one wireless route)
◆ Method: the original ADSL cat ---> wireless route --> Computer
◆ Note: ADSL cat ---> connect to the WAN port of the wireless route
◆ Go to the Management page of the Wireless Transmitting Station http: // 192.168.1.1.
◆ If you use a wireless route to automatically dial up the Internet, set ADSL dialing in the WAN settings on the management interface. This is OK. Download (58.17 KB)
◆ If you want to change to manual dial-up Internet access, change the WAN connection PPOE to a fixed IP address. For example, 192.168. 1.2. Add an ADSL dial-up connection to your computer.

2. Use as a wireless switch: (applicable to an environment where a general company or only has multiple routes or expands a wireless transmitter switch on the original network) operation method:

◆ Use a network to connect your computer to a non-route LAN port, and then enter the WEB interface set by the wireless route linksys as http: // 192.168.1.1) set the following content ., Note: if you cannot obtain an IP address or enter a management IP address after your computer is connected, manually change the IP address of your computer to 192.168.1.XXX ).

◆ Connect the original resident network to the LAN port of the LINKSYS non-router: adsl cat (or leased line access) --> other routers (--> switches) --> wireless router. Note: The network cable from other routers or switches to the wireless router must be connected to the LAN port of the wireless router, that is, one of the four ports. Download (57.52 KB) to the DHCP function can be disabled, so as not to conflict with the DHCP on the original network.

3. Wireless route settings

After setting the above wireless route linksys to set the network access method, we need to set the SSID and router name of the router without routing, then your vro will run normally. Download (26.55 KB)

4. Set the following methods for wireless route security settings: one method or two methods.

◆ Use the secure password to set access and download (28.46 KB). After the route is set, use WEP In the connectionless connection management of the laptop, then you just need to dig the key 1.

◆ Filter by MAC address, download (33.08 KB)

5. other settings
◆ Route settings
◆ Firmware upgrade
◆ Port ing
◆ Download (43.94 KB)

6. FAQs about wireless route linksys settings

◆ At the beginning, I went in, but now I can't go in. I don't know what the password is. You have a RESET behind the wireless router and press "renew. Press down for 5 seconds. If it is still flashing. Turn off the power supply. Open again.

◆ Reconnect the wireless route to your computer's wired network cable. Then, use the CD to perform step-by-step operations. The other method is to use http: // 192.168.1.1 to enter the wireless management interface.