Arm Development Board, virtual machine vmware6.0 and PC mutual Ping

After two days, it almost crashes. Finally.

 

The Development Board is directly connected to the PC network cable (note that it is not a common network cable, but a specific network cable ).

PC configuration: You need to set an IP address for local connection, which is in the same network segment as the IP address of the Development Board of the virtual machine.

PC Configuration:

192.168.1.109

255.255.255.0

192.168.1.1

DNS: 192.168.1.1

 

Virtual Machine Configuration:

192.168.1.108

255.255.255.0

192.168.1.1

DNS: 192.168.1.1

 

Set Virtual MachineCustomMode, and selectVmnet0

Select the NIC in edit. Remember to set it to the driver directly connected to the NIC.

 

Development Board Configuration:

Use ifconfig on the Super Terminal to view the IP address of the Development Board

Use ifconfig eth0 192.168.1.110 up to set the IP address of the Development Board