Cisco's QoS speed limit and h3c a little difference, but overall, h3c of the comparison slag, the unit is not the same, the H3C car unit is KPBS, and the Cisco Police speed limit unit is bits per SECONDS,H3C this skipped. The theory of the token barrel is not verbose.
Configure the QoS speed-limiting process on the ASA as follows:
Steps:
Step 1: Create ACLs to match streams
Access-list rate_limit_lan-2 Extended Permit ip any object LAN-2
Access-list rate_limit_lan-1 Extended Permit ip any object LAN-1
Step 2: Create a Class-map
Class-map rate_limit_lan-1
Match Access-list Rate_limit_lan-1
Class-map rate_limit_lan-2
Match Access-list Rate_limit_lan-2
Step3: Create Policy-map
Policy-map rate_limit_lan-1
Class Rate_limit_lan-1
Police output 1000000
Policy-map rate_limit_lan-2
Class Rate_limit_lan-2
Police output 2000000
Step 4: Call the Policy-map to the interface
Service-policy Rate_limit_lan-1 Interface LAN-1
Service-policy Rate_limit_lan-2 Interface LAN-2
Test:
LAN-1 network Segment speed limit 1M, the test is as follows:
650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M02/6F/CC/wKiom1Wok_igV_uzAAB3rRrSR4c238.jpg "title=" Speed-lan-1. JPG "alt=" wkiom1wok_igv_uzaab3rrrsr4c238.jpg "height=" "width=" 429 "/>"
LAN-2 network Segment speed limit 2M, the test is as follows:
650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M00/6F/CC/wKiom1WolAzSzvSiAAB9Hkt17uM966.jpg "title=" Speed-lan-2. JPG "alt=" Wkiom1wolazszvsiaab9hkt17um966.jpg "height=" 101 "width=" 426 "/>
This article is from the "Network Technology" blog, please be sure to keep this source http://zhangjialin.blog.51cto.com/10512577/1675617
ASA QoS Speed Limit