There are many issues to consider when setting up personal website servers. Today we will discuss the network problems of personal website construction. We all know that a WEB or FTP site established on a LAN can only be accessed through the Intranet, but not through the Internet. To solve this problem, we usually apply for an IP address with a peanut shell to bind a domain name, set the ing on the Broadband Router, and map the domain name to the machine of the Intranet WEB/FTP server. In this way, you can access the Intranet WEB/FTP server by accessing the domain name.
I. Preparations
1. Introduction to Internet access:
I use the Internet: ADSL + router, the product used here is TD-8800 + TL-R480T. There is a WIN2000 Server in the LAN, which is used to build a WEB/FTP server.
The structure is as follows)
ISP--ADSLTD-8800) -- router TL-R480T) -- SERVER WIN2000 SERVER System, IP: 192.168.1.222 ).
The TL-R480T supports virtual servers that provide server setup, which can specify a specific host of the internal lan as a Web, Mail, FTP, and other types of servers. DDNS features built-in peanut shells and kemai clients. You can log on to these two websites to obtain free Domain Names. By setting the client on the vro, you can achieve dynamic domain name conversion.
2, apply for free peanut shell Domain Name: Apply for free dynamic domain name site address: http://www.oray.net, http://www.comexe.cn. Log on to the official website of peanut shells to register a domain passport and apply for a free Domain Name For peanut shells. After registration, you must go to the peanut shell management center to activate the domain name. The dynamic domain name I applied for is: http://luruihuaweb.vicp.net.
2. configure a Broadband Router
In front of the official website has been in the peanut shell applied for dynamic domain name: http://luruihuaweb.vicp.net, in the internal network to establish WEB, FTP server, must open the corresponding port, define the WAN service port and LAN server ing relationship, next let's start setting up the TL-R480T.
1. Set the virtual server: Open the vro setting interface. In "virtual server", map port 21 and port 80 to the Intranet FTP server and WEB server respectively ,:
2. Change the remote WEB Management port: Port 80 has been mapped to the WEB server on the Intranet. You need to modify the remote WEB Management port at this time ,:
3. Set DDNS:
Through the above configuration, the basic configuration of the vro has been completed. Next, configure the server.