CISCO 2918 vswitch password cracking method
1. Connect the console port of the vswitch to the terminal or PC Super Terminal.
2. Press and hold the mode key on the switch, and then turn on the power supply.
3. initialize Flash
Switch: Flash_init
4. Rename the configuration file containing the Password
Switch: rename Flash: config. text Flash: config. old
5. Restart the vswitch.
Switch: boot
6. Enter the privileged Mode
Switch: enable
7. The Password is ignored when the instance is started.
Switch: rename Flash: config. old Flash: config. text
8. copy the configuration file to the current system.
Switch: copy Flash: config. text system: running-config
9. Change the password
Switch: enable secret cisco
10. Save the Configuration
Switch: copy running-config startup-config
In this case, you can upload the configuration file and vlan. dat in flash to TFTP ..
# Erase startup-config clear all configuration commands;