The following uses our system as an example to describe how to fl ck3:
Code gun model: intermec ck3
Tip: Risks of Flash brush
- Find the OS of the corresponding ck3 machine on the intermec.com websiteProgram(Simplified Chinese Version) ck3 WM 6.1 classic (premium)
Chs OS bundle ver., And ck3 wm6 sspb console and SD card install program.
- Decompress the two programs downloaded on the computer and execute the. exe file on the Local Computer for installation. By default, the program is installed in C:/program.
Files/intermec/Under the Directory
- Set C:/Program
Files/intermec/<version>/OS/all files in the folder are copied to the root directory of the SD card (the SD card capacity cannot exceed 2 GB.
- Install the SD card on ck3;
- Restart ck3;
- Put ck3 on the communication base or install the battery (must be a fully powered battery). ck3 is automatically started and can automatically find the OS installer on the SD card for flash. Wait until the screen is displayed
"Autoflash: complete ". Indicates that the flash is complete. Long press the power key to shut down.
- Remove the SD card and delete all files on the SD card;
- Set C:/Program
Files/intermec/<version> _ sspbinstall/copy all files in the folder to the root directory of the SD card. Under this folder
Contains a "sspb" folder and a "_ sstransferagent. xml" file;
- Create a self-developed terminal system as a cab file and copy its cab package to the sspb directory of the SD card;
- Open the _ sstransferagent. xml file in the sspb folder, and add the statement as follows,
You can also refer to the example file. Note that the file name must be English or letter and Chinese characters are not supported;
11. Install the SD card on ck3 and start ck3 normally. After ck3 is started, it will automatically install sspb. It takes about 15 minutes and you need to wait patiently. After installation is complete
Ck3 restarts automatically;
12. After the system is restarted, the self-developed system can be used normally.