Common Play game computer failure problem answer

Why do I have to scan the disk every time I boot

Q: My Computer is WinXP, and recently a problem has occurred: almost every boot will be ScanDisk, and almost every partition will be scanned once. In addition, in the process of running often crashes or blue screen phenomenon, even in the reload system occasionally appear blue screen phenomenon, how to deal with?

A: You may encounter problems with the hard disk, power supply or motherboard and other accessories, and hard disk is the most likely problem, so start from the hard drive check. WinXP Hardware quality requirements are relatively high, if the hard disk has bad problems, you will encounter the fault, in addition, if the power or motherboard quality is not good may appear similar phenomenon. You can follow these steps to detect the processing:

1. Because the hard disk is the most likely problem, so first change a good quality hard disk, see whether this phenomenon, if there is no such phenomenon or can not replace the hard disk, the original hard drive directly to detect processing. In order to ensure that the hard drive data cable is not a problem, before testing, it is best to replace a reliable hard drive data cable.

2. Find some hard disk repair software, such as Hddreg, MHDD, Fbdisk and so on, of course, the original DM software. First with the original DM tools to deal with the hard disk, many small problems with DM can be resolved, and after the DM processing and other software processing, hard disk repair time. The hard drive is then processed using Hddreg, MHDD, and Fbdisk software. After processing, most of the less serious hard drive failures can be resolved.

3. If the use of the above software can not be repaired, or after the replacement of the hard disk problems still exist, then only then replace the power supply and the motherboard for testing, power supply is not enough or poor quality is more common cause system instability.

Why is it easy to freeze the flower screen when playing games

Q: My computer is configured to: P4 Celeron 2.4GHz, 256MB memory, GeForce4 mx440-8x graphics, installed DirectX 9, when playing some 3D games will crash and flower screen. Excuse me, what is the reason?

Answer: When playing the game, the reason for the dead flower screen is more, one is the graphics card's own hardware problems, such as the display of the graphics card is a minor damage, graphics card workmanship or poor compatibility, will lead to the electrical performance of the video card greatly discounted, such as this situation is best to use the replacement Because of the use of AGP8X graphics card, users can also in the BIOS to adjust the speed of the graphics card to agp4x try, there is also the best video card is not easy to overclocking. In addition, the cause of the crash when playing 3D games may also be the graphics card cooling, please carefully check the video card heatsink is normal.

Second, in addition to the graphics card itself, it may be related to other accessories, such as the motherboard of the AGP slot power supply, you can try in the motherboard BIOS appropriate to increase the operating voltage of the AGP slot. Other such as memory, CPU and other accessories have quality problems may also cause playing 3D games frequently panic.

USB removable hard drive is not available under Win2003

Q: My computer is installed in Windows Server 2003 Enterprise Edition, after the 60GB USB2.0 mobile hard disk, in the "My Computer" does not appear to move the hard disk letter, how can i solve? A: First please confirm the motherboard USB interface, mobile hard disk power supply and signal line is no problem, some mobile hard disk power supply requirements, sometimes the motherboard USB interface power supply can not meet the needs, the best use of external auxiliary power supply method. After shutdown, the power supply of the mobile hard disk and the PS/2 terminal of the signal line are plugged into the PS/2 port of the mouse, and then boot into the system to see if the disk character of the mobile hard disk appears.

In addition, there are problems with Windows Server 2003 's identification of part of a removable hard disk or USB flash, which needs to be resolved manually. Go to Computer Management in Control Panel, in the left window, select Disk Management, on the right side of the window there will be a "good" USB flash or mobile hard drive listed by the system, but may appear as "unused", right-click on the device icon, select "Change Drive letter and path", and then click in the pop-up window Add, select a letter from the combo Drop-down menu to the right of the window, and the system will automatically add the storage device, and the USB removable hard drive will be used normally.

The computer soon beeps when it's used.

Q: My computer is configured to: Athlon XP 2500+ CPU, Pan 8rda3+ motherboard, two 256MB Kingston DDR333 memory, seven rainbow popular FX5600 graphics, Seagate Cool Fish 7200.7 (SATA) 80GB hard drive. Recently boot run for some time after the computer often beeps, playing games often panic. Don't know what's going on?

A: After running for a period of time after the computer beeps, is generally CPU temperature over the set alarm temperature caused by, although you can improve the alarm temperature in the BIOS so that the system does not emit alarm sound, but because the game often crashes, indicating that the CPU temperature has been very high. So you should check your CPU fan operation is normal, CPU heatsink temperature is very high, if the temperature is very high to take measures for the CPU cooling. Due to high summer temperature, some computers often over-temperature alarm phenomenon, we should check the situation of the CPU fan or replace the high quality CPU fan, so as not to burn the CPU.

The reason why computers often crash

Q: The computer configuration is Turadin Celeron 1.2GHz, MSI MS-6337 motherboard (815EPT pro-nl), two Hy 128MB SDRAM, Seagate 40GB Hard Drive, GeForce2 MX400 video card. Recently installed WinXP, in the installation process often freezes, not easy to install finished, but in the WinXP also often panic, reinstall a few times, the phenomenon remains. The motherboard BIOS refresh or often panic, and finally the main board discharge processing, the results of the computer run a day is no problem, the next day after the boot into the WinXP found still will crash, what is this problem?

A: The motherboard after discharge into the WinXP does not crash, not discharge will panic, the cause of this situation is likely to be the BIOS of the option settings are problematic. It is recommended that you adjust the BIOS settings according to the motherboard specification, or enter the BIOS without discharging, then select "Load BIOS setup Defaults" to restore the BIOS default configuration and save the exit. Then start into the WinXP to see if there will be a panic situation. If the panic does not occur, it is definitely a problem with the BIOS setup.

According to the situation you introduced, there is another possibility is that there is a memory problem. It is recommended that the memory speed be set to a low in the BIOS (the value of the CAs and other parameters of the memory will be set to a larger number). You can also keep a single memory bar to try to see if two memory has compatibility problems.