Detailed analysis of common ro ROS commands

Maybe many people do not know about the soft route ROS, so I have studied the Common commands of the soft route ROS, And I will share them with you here, hoping to help you. I have read a lot of information about how to install the soft route ROS, but I rarely see the command about the soft route ROS, maybe because of winbox.) Although I have explained it in the soft route ROS manual, however, the English version is not easy to understand.

1. What is frequently used after logging on to [font =] [/font? Is a commonly used HELP command, which can list available commands and simple instructions.

2. Some English commands are very long and can be abbreviated as interface. After you enter in, press enter to automatically enter the interface. Or you can press the tab key to complete the long English command input.

3. Some commands have many parameters. When you do not know, you can enter the command and add a space ?, Such as print? The command parameters are displayed.

4. Everyone should remember the setup command, because the IP address of the NIC must be allocated after the routeros is installed.

5. iprouteaddgate = 211. 12. *. 14,220. 163. *. 12 this command is used to add multiple gateways for multi-line access.

6. ipfirewalladdaction = natprotocol = tcpdst-address = 212. 12. *. */32: 80to-dst-address = 192.168.0.198 this command is used to map port 80 to local 192.168.0.198.

7. print this command is used to list all projects.

8, interfacemonitor-traffice0, 1, 2 can monitor the current 0, 1, 2 network card activity.

9. ipfirewallconnectionprint displays all current connections.

10. iparpprint displays the list of IP addresses and mac addresses that all routeros know.

11. useractiveprint displays the active users of all routeros.

12. systemreboot and systemshutdown are respectively restarted and shut down.

13. Delete all original configurations in systemreset and restart routeros.

14. systemresourcemonitor can monitor the current cpu and memory usage.

15. logprint can display routeros logs.

16. toolping-speed210.13.14. * shows the ping speed.

17. toolsnifferstart and toolsnifferstop can enable and stop the sniffer.

18. toolsnifferpacketprint can be used to list sniffing packets.

19. systembackupname = 2004107. bak can back up the system configuration to the file 200.07.bak, which can be seen in fileprint.