Detailed description of wireless route connection settings

The use of the network is no longer difficult. In particular, wireless network applications have largely released more Internet applications. Here we will explain the problems related to wireless route connection settings, such as virtual server simulation and data packet filtering. A new experience is waiting for you. Recently, wireless networks are gaining momentum, and the slogan of popularizing wireless networks further occupies the market. The price of wireless product packages also drops, but it cannot be left blank when many friends encounter various problems when installing and configuring wireless networks.

This article describes how to operate the wireless network card installed on the computer to connect to the Wireless Broadband Router and build your own wireless LAN. In this article, the wireless router is selected TP-LINK domain? 54M Wireless Broadband Router TL-WR541G, wireless network card selection is TP-LINK area display/Speed Display wireless network card TL-WN510G/550G/610G/megag series products.

1. Wireless route connection settings

◆ Enter the TL-WR541G configuration interface, in the "Wireless Network Basic settings" interface default configuration is as follows:

◆ Meaning of each parameter on the page: SSID: used to identify the service set identifier of a wireless device. A wireless router uses this parameter to identify itself, so that the wireless network card can distinguish different wireless routers to connect. This parameter is determined by the wireless router, not by the wireless network card. Think about it from another angle. For example, there are two wireless routers A and B around the wireless network card, they use ssid a and ssid B to identify themselves. At this time, the identifier of who is connected by the wireless network adapter is identified by the SSID.

◆ Here we use the default SSID is the TP-LINK, of course you can change this parameter according to your preferences, to a easily remembered number or letter or a combination of the two. Channel: used to determine the frequency range of the network. The value ranges from 1 to 13. The default value is 6. This parameter only needs to be noted in the application: If your neighbor's house is deployed with a wireless network and the channel used is 6, in order to reduce the Wireless Interference between the two wireless routers, you can change this parameter to 1 or 13.

◆ Wireless route connection Setting Mode: this parameter is used to set the working mode of the wireless router. Two options are available: 54 Mbps (802.11g) and 11 Mbps (802.11b ), we do not need to modify this parameter. The default value is OK. One thing you need to note is: Suppose you purchased our quick exhibition? M Wireless Broadband Router TL-WR641G, then in this parameter there will be two more options a total of four are 11 Mbps (802.11b), 54 Mbps (802.11g), 108 Mbps (Static) and 108 Mbps (Dynamic), there are two more static memory m and Dynamic memory M.

◆ When should I select 108 Mbps (Static) and 108 Mbps (Dynamic? We can determine: if all the wireless network card models connected to WR641G are our fast-moving products? Memory M wireless network card TL-WN610G/650G, this time you can choose WR641G work in Static (Static) memory Mbps mode, in addition to other situations, all choose Dynamic (Dynamic) mbps or 54 Mbps (802.11g) mode.

◆ Enable wireless function: Enable and disable the wireless function of the TL-WR541G. Allow SSID broadcast: by default, wireless routers advertise the existence of the SSID to the surrounding space. In this case, you can find the existence of the wireless router. If you remove the hooks in the check box, that is, the Wireless Router does not broadcast the SSID. In this case, the wireless Nic cannot find the existence of the wireless router.

◆ Above this is the TL-WR541G "Wireless Settings" inside the default parameters, when WR541G after power-on, will generate a wireless network around WR541G, the SSID identifier of this network is "TP-LINK", the MIIT is 6, the network is not encrypted. At this time, an unencrypted wireless network exists around WR541G and can be provided to a wireless network card for connection;

Ii. Wireless Nic Configuration

Wireless route connection setup method 1. Setting the wireless network card to connect to the wireless router is complete. Now we will take WN510G as an example to explain how to configure the wireless network card on the computer:

◆ After the installation process is complete, the NIC driver will be properly installed in the computer "Device Manager.

◆ At the same time generate the desktop as the next icon -- "TP-LINK domain exhibition Client Management Program", this program is our management interface card management tool:

◆ At the same time, we will see the following display on the taskbar icon in the lower right corner of the desktop:

◆ Like the two icons above, show that the TL-WN510G has established a wireless network connection with the TL-WR541G, the green icon is "TP-LINK domain expansion" Management Program display; if your computer's taskbar is not displayed, it is because in the "Network Neighbor" right-click attribute, the "wireless network connection" display attribute is not selected.

◆ The cause is not checked in the red mark! In addition, we also marked a "wireless network connection" property page with a red line above.

◆ The option marked by the red line above is the wireless network card management program that comes with Windows. We do not recommend this option. If this option is checked, it indicates that the Wireless Configuration program that comes with Windows is enabled to manage the network card, this hypervisor conflicts with the TP-LINK domain scale client hypervisor, and this hypervisor that comes with Windows cannot fully play the role of a TP-LINK wireless Nic, so we do not recommend it here.

◆ Remarks: The above shows that the TL-WN510G in the normal installation, has established a wireless connection with the TL-WR541G, this is because the operating system in the wireless part of the operating system can automatically run, search for and connect to an existing wireless access point on the wireless router. This process is intelligent without user intervention. By default, the network adapter automatically connects to the wireless router.

Wireless route connection setup method 2. link a specific wireless route

It is quite convenient to connect to a wireless network in a single wireless network environment, but if you are in multiple wireless network environments, You need to select a specific wireless network.

◆ With reference to the TL-WN510G User Manual to install the NIC Driver and management program, will generate a "TP-LINK domain expansion" Management Program on the desktop, double-click to open the interface is as follows:

◆ We operate the NIC through the "configuration file management" marked by the Red Line. Click the "configuration file management" interface as follows:

◆ Select the default configuration file marked by the red line on the left, and click "Modify (M)…" on the right )...", A new dialog box is displayed.

◆ "SSID1:" marked by the red line is the object we want to operate on! The SSID identified on the TL-WR541G is "TP-LINK" That is to say, the wireless router side confirms that the SSID is a TP-LINK, and the parameters we fill in the "SSID:" field marked in the red line must be: TP-LINK! That is to say, the SSID entered by the NIC must be consistent with that entered by the wireless router! Then, click "OK" in the lower-right corner to go to the upper-level page. Click "Current Status" to see that the NIC has established a connection with the corresponding wireless router according to the SSID parameter we entered.

◆ The above describes a simple wireless route connection setup operation when you know what the SSID is determined by the wireless router end, you can manually enter the SSID to direct the NIC to connect to the wireless router, but from the perspective of the wireless network card, if you do not know what the SSID is determined by the wireless router end, what should we do? Or as a network card, you just need to discover it and see if there is a wireless access point that you can connect? How can this operation be performed? See.

◆ We can see the "Search (C)…" marked by the Red Line )..." Button, which is used to search for a wireless network that can be connected to the network card? Click to bring up a new dialog box.

◆ There is a "refresh" button, when we click the refresh button, the box shows three wireless routers around the TL-WN510G, we have a simple explanation of the red line marked parameters:
Network Name [SSID]: TP-LINK, Sales, and unknown, respectively ".

A wireless router with an unknown SSID is encrypted in the parameter column of a key. Speed-up parameters: If a wireless router enables TP-LINK speed-up technology, this column will have a speed-up icon. Domain expansion parameter: displays that all three current wireless routers are enabled with TP-LINK domain expansion technology. "Signal Strength" parameter: This column shows that the signal strength of the first two wireless routers is 100%, and that of the third wireless router is 80%.

"Channel" parameter: This column shows that the channel of the first two wireless routers is in 6 channels, and the channel of the third wireless router is 11. "Wireless mode" parameter: This column shows that all three wireless routers are in the 2.4 GHz 54Mbps rate mode. The SSID is a circle in the shape of the signal tower in front of the wireless router icon of the TP-LINK, which indicates that the TL-WN610G is currently in connection mode with the wireless router.

◆ If we want to direct the TL-WN610G to connect to the wireless router whose SSID is Sales, then as long as you click the Sales SSID, the following "Activate [A]" button will show operational status, then, click "Activate [.

◆ In the pop-up wireless route connection setting interface, the SSID1 position in the "Network Name" is automatically filled with the SSID of the selected wireless router, that is, "Sales ", the focus of the cursor is located in the "configuration file name" column by default. We can enter a name such as TEST and click "OK" to return to the upper-level interface as follows: there are two configuration files in the "configuration file management" Page. One is the default configuration file default during the connection.