DIY is a personalized wireless cloud hotspot

An old classmate suddenly mentioned to me wiwiz this stuff, known as cloud hot expert, specific introduction please go to the official website to understand, here not to say, http://www.wiwiz.com/, so almost understand and practice a bit, go straight to the topic below.

Prepare the hardware environment:

Because I only use linksys WAP54G as the Wireless AP model to perform experiments here (all are elimination products, so don't worry even if it is built into bricks) in order to implement the wireless hotspot function, we need to use firmware to turn this AP into a wireless router, so we don't need to spend a lot of money to buy a wireless hotspot gateway, with the help of the famous open source router firmware DD-WRT and a cheap router, you can completely DIY a wireless hotspot gateway, one advantage is that you can purchase a simple Wireless AP router between and, and upgrade it to a free firmware, to obtain the similar functions of the "real" Hotspot Network Gateway that costs thousands of dollars.

Step 1: Start the firmware flushing process:

Http://www.dd-wrt.com/found the corresponding AP firmware version on the official website

 

Press and hold the reset key (reset) after the AP to perform the following operations. The hard reset (also known as the 30/30/30 reset method) should be performed at each firmware upgrade.AfterAll done once

30/30/30 hard reset [that is, after the power insertion is stable, press the reset key not to release for 30 seconds, do not release power loss for 30 seconds, do not release power insertion for 30 seconds]

After resetting, the AP will be flushed. This AP is a few of the functions of the pull, and it often crashes when used.

Flash a few seconds to complete the brush, success, the chicken ~ Haha, no bricks changed. You need to change the user name and password for the first entry.

The wifidog function is not available in this firmware version hotspot, so the method I set up here is only done using the virtual machine + wireless routing method. Why? Go to wiwiz to learn about it.

Here is the detailed method of virtual machine settings, http://www.wiwiz.com/zh/archives/109.htm/ I will not do more introduction.

Download the virtual file to your local device.

Use vmware to open and run virtual machine files

Go to the official website to create a hotspot

You can customize settings.

The user-defined logon verification page is successfully displayed through WIFI.

Log on to the verified page to access the Internet.